Norinco M93 Woodsman issue

flatlandju

New member
EE Expired
Rating - 0%
0   0   0
Hey, I'm just wondering if anyone has any experience with the safety popping out on the M93. I was at the range the other day and my slide jammed open about an inch, and the safety just fell right out when the grip was removed. Now the thing is stuck an inch open, slide wont move forward or backwards, and this thing is less than two weeks old! never dropped, only saw about 100 rounds. Anyone?!
 
Fig-3.jpg


The Safety (#27) is held down by Side Plate (#29) with its Screw(#30).
Are you missing those parts?
 
Thanks for the response! Yeah, those parts are all there, the safety is sitting over top of the plate though..

The safety sits underneath the Side Plate, this should solve your problem.

When you put the Safety back in, make sure Firing Pin Block Retractor (#20) is the correct position, and #19 Hammer Strut Pin inserts another direction than the diagram shown.
 
Yah I had a bit of a struggle to get mine together as well.I took apart to clean and the side plate was so loose crap fell out lol.Luckily I found that diagram and figured it out.That little plastic piece # 20 is what had me confused.Took to the range and all is well.
 
Back
Top Bottom