Norinco NP22 with Sig Sauer .22 conversion kit (pic heavy)

[did_b]

Np 22 cAme in today and i got the sig 22 conversion kit to fit. Took about an hour.

The slide was quite tight at first. Oiled it up good and slowly worked it and it pretty well fit itself and loosened up a bit.

The square section of barrel near the breech end hits the locking insert and the edges of the barrel need to be filed down. Removed some material with a dremmel and it appears to function fine. Slide feels very smooth, and magazine seats fine as well.

I'll clean it up and get it out to the range in the next week or so and write up a little how to with some pictures.

 

[MTLGUN]

gl did_b. looking forward to more news on this.

 

[tdool]

Looking forward my self

 

[did_b]

Tested it out today and worked great. Put about 200 rounds through it. Should have brought more ammo.

Here's how to do it - http://imgur.com/a/4oVUe

 

[thenewbieglockguy]

Nice! That looks really neat! Wouldn't even thought of doing that!

 

[thenewbieglockguy]

Tested it out today and worked great. Put about 200 rounds through it. Should have brought more ammo.

Here's how to do it - http://imgur.com/a/4oVUe

Isn't that always the case

 

[Pistolwhiptricks]

Well done.

 

[tdool]

so basically all that is needed is a little material removal off the barrel. Sweet :-D

 

[weasel1]

Awesome! Daddy's picked out his first pistol! Now I just need to get it approved by the minister of finance....