nork m4 round count

[TacticalDan]

I was just wondering ,now that the nork m4s have been around a while what are peoples round counts at ..mine is still new only about 500 rounds and never a hicup or any problems what so ever ...what are your like..Dan

 

[colin455]

Ive only got about 300 rds through mine but I keep getting bolt feed failures(?). When you hit the bolt release button on the side sometimes it hangs up and you have to pull the charging handle. Cleaned it twice already after each use. Doesn't hang up right away but after a few mags. Recoil cycles fine. Figured it was a break in thing. Hung up 4 times so far. Any ideas?
Norinco CQ556

 

[Mr. Finicky Timbers]

Are you using the mags that came with it?

 

[TacticalDan]

yes but mostly im using 10 round plar mags.

 

[lmar]

After last year's 1200 round's in one day I've added another 700 to make a total of just shy of 1900.

L

 

[Nester]

Around 750 without a hiccup

 

[Coyote Ugly]

my #### fell off cuz it wuzn't usgi colt.

round count 3

 

[ViktorF]

Ive only got about 300 rds through mine but I keep getting bolt feed failures(?). When you hit the bolt release button on the side sometimes it hangs up and you have to pull the charging handle. Cleaned it twice already after each use. Doesn't hang up right away but after a few mags. Recoil cycles fine. Figured it was a break in thing. Hung up 4 times so far. Any ideas?
Norinco CQ556

check the buffertube to make sure its oiled well enough...or some paint hasnt come off causing a blockage.

 

[jessekf]

80 through my Norc14 without a hiccup.

 

[harbl_the_cat]

Around 500 .223, 1500 .22lr - although my .22 kit broke inside it.

 

[jdman]

Id say mine is around 1500+/- I have also had the bolt issue. I will try some oil in the buffer tube.

all in all though, GREAT rifle, at 25 yrds with open sights it does the trick well. Waiting on a scope from marstar to go out farther.

 

[mackattack]

Your answer's are on google

 

[enefgee]

Run it wetter, if it hangs up it'll usually be because it's dried out, it's smart to carry a little spray bottle of lube, just spray it through the e-port and rack the action a few times. Don't oil the receiver extension, buffer or spring they're not designed to be wet.