North Eastern Arms Heavy and Hybrid brakes

[Charles Martel]

The Hybrid is available and the heavy brake will be available in Feb

 

[nemesys]

What do they do better that the others out currently don't?

 

[chopper 1]

If

If the heavy brake has the extra holes only on top and the side holes are slightly smaller than the current similar brake it may vertical jump less than the current same style.

The other seems to be just a flash hider.

 

[tiriaq]

....The other seems to be just a flash hider.

The reduced diameter muzzle opening would make it a brake. A FH would have a large opening.

 

[chopper 1]

True

The reduced diameter muzzle opening would make it a brake. A FH would have a large opening.

Just noticed that in the pic -
Yes it would brake, but not as much as the heavy - the slots are to small for 7.62x39 for the gas to dissipate out the sides -

 

[Charles Martel]

Just noticed that in the pic -
Yes it would brake, but not as much as the heavy - the slots are to small for 7.62x39 for the gas to dissipate out the sides -

it dampens recoil more then any other brake on the market

 

[Nova-Wake]

i get stuck having to weld my brakes on, how hard is it to clean one of these things when on the rifle is finish gonna be more resilient than the Czech stock?

 

[Drewz]

I need pricing and a website please....lol

 

[Satain]

i get stuck having to weld my brakes on, how hard is it to clean one of these things when on the rifle is finish gonna be more resilient than the Czech stock?

Is this because of a law or because of slop? I say this cuz I have slop when attaching brakes on my rifle until I used the yellow "gas fitting" plumber's tape that you can get @ Lowe's or Home Depot.

 

[Nova-Wake]

Is this because of a law or because of slop? I say this cuz I have slop when attaching brakes on my rifle until I used the yellow "gas fitting" plumber's tape that you can get @ Lowe's or Home Depot.

unfortunately due to law damn half inch. Only reason ive been avoiding putting a brake on is because i hear there a b***h to clean, so ive held off.

 

[chopper 1]

How so ?

it dampens recoil more then any other brake on the market

How does it do it with less hole space ? -

Did you do the "skateboard" test ?

Height measurements ?

 

[Charles Martel]

How does it do it with less hole space ? -

Did you do the "skateboard" test ?

Height measurements ?

no and yes.

 

[chopper 1]

Your answer -

no and yes.

Dont understand your answer -

Reversed no and yes ?

Height jump compared to all the others in recoil ?

Higher ? lower ?

 

[chopper 1]

I aint

I aint pullin yer chain charles -

The one brake looks like it may be a great improvement on a proven design -

The other looks like a flash hider -

 

[Charles Martel]

did i mention they are going to retail for $40?

 

[Drewz]

Must have the one for my gun especially at that price.

 

[Stevo]

I've had one of the "hybrid" pre-production models for a while. It's a decent flash suppressor and it does reduce the recoil a bit. I don't have any empirical data but it does shoot "softer" than with no muzzle device installed. In near-dark conditions all the flash that could be seen was a small "ball of flame" entirely contained inside the muzzle device.

In the white:

Painted, on the back rifle:

 

[Greens_11]

I've had one of the "hybrid" pre-production models for a while. It's a decent flash suppressor and it does reduce the recoil a bit. I don't have any empirical data but it does shoot "softer" than with no muzzle device installed. In near-dark conditions all the flash that could be seen was a small "ball of flame" entirely contained inside the muzzle device.

In the white:

Painted, on the back rifle:

Not pre production but tried out the Hybrid last night. It does everything Stevo says to a tee. I think it is one of the best brakes I have tried to this point.

I am excited to try the heavy brake when it is released.

 

[marshall_law]

Is this because of a law or because of slop? I say this cuz I have slop when attaching brakes on my rifle until I used the yellow "gas fitting" plumber's tape that you can get @ Lowe's or Home Depot.

thx for tip!

 

[Mike_R23A]

Questions for ya:

-what is it made out of?
-where can I get one??