Nosler 110 accubond

[bearhunter338-06]

Can anyone send me the reloading info from the new Nosler manual for the 25-06 110gr Accubond. Powders and loads, also looking for info on reloading the Barnes 115gr tsx for the same rifle.
Thanks.

 

[rishu_pepper]

Use H4831 for 110 AB, can't remember the weight off the top of my head.

Stay away from the 115 TSX, they are flat base and may not stabilize in your rifle (it didn't on mine, 1-10" twist). Go with the 100 TSX, a boattail. Also I believe an 80 TTSX is coming out.

 

[GRiNGo]

From the Barnes #4 manual: FOR 115gr TSX FB for 25-06 Rem

RL-19 47.0grs(min)2827fps 52.0grs(max)3078fps 89%LD
IMR 4831 45.5grs(min)2821fps 50.5grs(max)3080fps 89%LD
*H4831SC 47.0grs(min)2797fps 52.0grs(max)2996fps 88%LD
MagPro 53.5grs(min)2894fps 58.5grs(max)3115fps 90%LD
RL-22 48.0grs(min)2881fps 53.0grs(max)3148fps 89%LD
Magnum 55.0grs(min)2969fps 60.0grs(max)3161fps 93%LD
Retumbo 51.5grs(min)2828fps 56.5grs(max)3080fps 98%LD

*Most accurate load is marked as H4831SC

 

[GRiNGo]

bearhunter338-06 if you want I can scan the 25-06 section and e-mail it to you.

 

[rishu_pepper]

That's what I thought about the H4831 load. I remember 49.5gr got me under an inch, so I stopped developing and went hunting

 

[martinbns]

I had great results with that bullet in a 25-284 I had for a while. My max load was 1 or 2 grains under the 25-06. I used H4831sc.