Notice to all who purchased P-Mags from me

[hicaliber]

Just a quick note to anyone who bought P-mags from me a few weeks back.
I had a nutter contact me and say his mag would not hold 5 rounds.
He bought 10 mags only 1 had a problem.
He sent it back and upon inspection I noticed that they were pinned with extremely long rivets and the rivets deformed enough during the compression that it was stopping the follower from coming down far enough.

It is a very easy fix!!
Remove the base plate, carefully drill out the rivet with a 1/8" drill bit by placing the drill bit in the hole in the centre of the rivet, shake out the little piece of rivet that is inside the mag.
Install a 1/8" x 3/8" long rivet, put the baseplate back on.....DONE
I have not had any problems with my own mags but intend to do them all as a precaution, don,t need them acting up during a 3 gun.
When I spoke with the guy about pinning them I told him to use long rivets, he used extremely long rivets.
I apologize for any inconvenience this may cause you but the whole process should take about 60 seconds to complete.

 

[Justins1877]

Is that not illegal to drill out the rivet even for 60 seconds? Honest question.

Next question, DO YOU HAVE ANYMORE?!

 

[Canuck223]

Is that not illegal to drill out the rivet even for 60 seconds? Honest question.

Next question, DO YOU HAVE ANYMORE?!

Magazines are like any other mechanical device. They occationally need servicing. Having an intact and functional origional capacity mag is a problem. Having a disassembled collection of magazine parts is not.

 

[Justins1877]

Thank for you the info Canuck, as that was a serious question. Sorry to get off topic Hicaliber.

 

[rivetc78]

hmm la da dee dum......

 

[hicaliber]

no more right now but working on it.

 

[Armament]

lol

Play nice children.

 

[hicaliber]

Canuck, thanks you beat me to it.
Justin that is the reason I made sure to post to remove the base plate before drill out the rivet.
Again guys I apologize for the inconvenience.

 

[mackattack]

Thx Hical. I'll check 'em out tonight. Best part is, I'll have to use my new workbench...

 

[cancer]

Ah, I got one mag like this too. Nice to know it can be fixed.

 

[TDC]

Is that not illegal to drill out the rivet even for 60 seconds? Honest question.

Next question, DO YOU HAVE ANYMORE?!

You people worry about the dumbest sh*t. Get the f*ck over it. The law is retarded and serves no purpose. Last time I checked none of my magazines had a tracking device linked to the local police in the event the rivet was removed.

TDC