I bought a garbage Cooey Model 60. It even came with a full box of CCI`s. This gun isn`t worth much at all: Stock is cracked, gouged and initials carved in it. The Cooey name is almost ground off it. It is tube fed, and how the heck do you get the bolt out? I have the stock off, I used brake clean on it, but I can`t get the bolt out. It has the pull back deal, but even pressing the trigger won`t release. This thing needs a bad scrubbing before even attempting to see if it will even fire. Darcy
Old Cooey Model 60, break down??
- Thread starter darcy32171
- Start date
Loosen the screw/bolt that holds the tube mag in place. It is in the same location as the screw you took out to remove the stock. There will be 2 slots cut in it to use a big straight edge in. Hopefully that's not as clear as mud for you
gunsaholic
CGN Ultra frequent flyer
- Location
- Winnipeg, Manitoba
Yep, once the stock is removed you have to loosen that screw and the mag tube will drop down. Then pull the trigger and remove the bolt. When reassembling, do not overtighten that screw or you could bend the tube. You do know that the tube goes back and forth when you work the bolt.
