PC 10/22 Adjustable Hammer/Sear Pack

[Hankus]

Anybody have one installed?

 

[brianmp]

I installed a trigger sear hammer combo from brownells and it reduced my trigger pull from about 10 lbs to about 3.

very satisfied

 

[gunasauras]

I have used both VQ and PC, and much prefer VQ for drop in no fitting use....I found the PC stuff was less than a perfect drop in, and had to be fiddled with extensively to be brought up to par.....just my two cents....

 

[Hankus]

Thanks guys.

 

[Hitzy]

My PC matched hammer/sear kit was perfect, no issues. I like it becasue it comes with a few shims to take up the slop.
I have not tried the adjustable sear. It looks like it would be a huge pain in the ass to get it set up, with the possiblity that it will work loose at any time.
The drop in kits are pretty decent.

 

[gunasauras]

The PC adjustable sear is a pain in the A$$ to adjust...I sold mine because I wasn't at all happy with it...

 

[Rod B]

The PC or Volquartsen hammer is all that is needed. In most cases the sear is not required.

 

[Mightymouse]

I installed the PC match hammer and sear in my 10/22T. Very easy to do, and the shims take out any side to side play.

Trigger pull is very light compared to stock (sorry didn't measure it) and the adjustability allows for fine tuning to your particular feel. Zero creep, just a crisp release and smooth reset.