Pellet gun issues

1

140mile

Member
Rating - 100%
373   0   4
Location
Caribou
Wondering if any of you nutters can help me out? Bought a Gammo Bigcat 1000 to 1200 fps,lots a hitting power n feels good,but the trigger on this pellet gun makes it almost un shootable! Are there any gammo owners that have had similar problems? Thx 140mile...........Well found the triggers either the GTX OR GRT GTR But how do I go about ordering 1 in Canada?Would anyone have a phone # or an email addy
 
Last edited:
I have a GAMMO - but didn't have any issues with the trigger pull - perhaps return it to the shop you purchased it from and inquire about it (or give the a call). Perhaps check the GAMMO site and see if there is any way that you adjust it on your own. Hope this helps.
 
I bought a
GTX trigger kit for my Stoeger and I remembered it fit different models. Below is what I found doing a search of what the trigger kit fits. The Big Cat is one of them.



Replaces trigger in the following models:

Beeman*
S-1

Benjamin*
Trail NP (all)

BSA*
Comet
Meteor Mk6

Crosman*
Quest (all)
Nitro Venom
Optimus
Phantom (all)
TAC1 (all)
Titan GP
Gamo*
BigCat
Carbine Sport
CF-20
CFX (all)
Delta
Hunter (all)
Maxima
Nitro(all)
Recon (all)
Shadow (all)
Stutzen
Varmint Hunter
Viper (all)
Whisper (all)
640 Carbine

NOTE - Will not work with new style plastic trigger Gamo models, for these, use the PTG Mod.
Remington*
Vantage
Summit

TechForce*
QB-88
TF-25
TF-58

Theoben*
Rapid MK-1

Xisico*
B-18
B-19



**Note: For instructions and support we provide the guides linked on this page. This is the full extent of the support we can supply on these custom parts. Please do not call with installation questions or instruction as we cannot give any verbal support. These custom parts carry no warranty, and use may void factory warranty on the product to which they are installed. Airguns of Arizona assumes no liability on the safety or function of the products listed on this page. All sales on these parts are final.
 
I bought a bejiman np trail that had the same issue. What I did to mind was I added washers to the pin that contacts the sear. Here is a video on what to do.


I personally went with a bigger washer but you have to becareful. To big of a washer and the gun will not latch when cocked. If you google around there's more videos of different people showing you what washers they used. I must say I have mine tuned to a hair trigger and I'm loving it and it only cost me a few cents at the local hardware store.
Hope this help, and good luck!
 
steeda351r said:
I bought a bejiman np trail that had the same issue. What I did to mind was I added washers to the pin that contacts the sear. Here is a video on what to do.


I personally went with a bigger washer but you have to becareful. To big of a washer and the gun will not latch when cocked. If you google around there's more videos of different people showing you what washers they used. I must say I have mine tuned to a hair trigger and I'm loving it and it only cost me a few cents at the local hardware store.
Hope this help, and good luck!
Click to expand...
I did this mod on my Benjamin Nitro and on my Gamo CFX as well. The triggers are virtually identical. It significantly improved the pull. I used an aluminum bushing of the appropriate size instead of washers though.
 
On crosman you can mod the stock trigger to be the same as GTX 2 stage, I've done it on mine and the end result is absolutely amazing. Not sure if the gamo trigger can be modded the same way though.
 
You must log in or register to reply here.
Back
Top Bottom