Pet loads for 10mm?

[B]

In the midst of purchasing a Glock 20. Factory ammunition available is pretty anemic so I think I will pick up dies and all that, do it myself. Anyone pushing the 180 or 200 Hornady HP around 1300\1200fps? It's pretty much what I want to do. Found a couple loads close but they dont list bullet type just weight. Any other interesting loads post 'em!

 

[koldt]

Accuracy load for me has been with a 165 Hornaday XTP in front of 4.5gr Bulleseye. I don't know the speed, just that it makes nice groups and isn't hard to handle.

 

[Camp Cook]

IMR 800X and Blue Dot are my favorite powders for the 10mm.

Go to the 10mm Reloading section @ Glock Talk for the best 10mm load data.

 

[OkDave]

My favorite load is 180g fmj 1.26oal w/9.6 grains of longshot. This is pretty close to a max load and turns my glock 20 and 29 into an absolute hand cannon throwing the 180g bullet out at a very consistant 1300fps with the g20.

Start with 8g of powder and work up!

Dave

 

[B]

My favorite load is 180g fmj 1.26oal w/9.6 grains of longshot. This is pretty close to a max load and turns my glock 20 and 29 into an absolute hand cannon throwing the 180g bullet out at a very consistant 1300fps with the g20.

Start with 8g of powder and work up!

Dave

Now thats what I am talking about, I plan on grabbing a 6" barrel as well. Is that what you are getting from the 4.6"?

 

[OkDave]

Yes, that is with the factory bbl. I cronied 6 rds, slowest was 1296 fastest was 1305. I have never had that kind of consistancy with reloads before!

Dave

 

[Camp Cook]

Yes, that is with the factory bbl. I cronied 6 rds, slowest was 1296 fastest was 1305. I have never had that kind of consistancy with reloads before!Dave

9.6grs IMR800X with 200gr XTP's will give you the same velocities...

 

[OkDave]

It wasn't the velocity that impressed me as much as the consistency.

Dave

 

[Camp Cook]

Then you should try IMR800X...