Pet loads for 6 mm Rem, and 243 Win;

6mmrem.jpg

5-shots, 200-yards

Caliber: 6MM Remington
Bullet: Sierra 85 Grain HPBT
Powder: 43.2 grains of IMR-4350
Primer: Remington 9-1/2
Case: Remington
Firearm: Ruger 77R
Optics: Leupold 3x9
Velocity: 3128 FPs @ 15' from muzzle


Caliber: .243 Winchester
Bullet: Sierra 85 Grain HPBT
Powder: 40.4 grains of IMR-4350
Primer: Remington 9-1/2
Case: Remington
Firearm: Ruger 77R
Optics: Leupold 3x9
Velocity: 3010 FPS @ 15' from muzzle
Accuracy: 5-shots, 200-yards, <0.75"
 
Some of my better 6mm Remingtion loads:

- 58 gr Hornady V-MAX, 36 gr IMR-3031, Rem large rifle primers.
- 70 gr SMK, 42 gr Varget, CCI large rifle primers
- 75 gr Hornady V-MAX, 41 gr Varget, CCI large rifle primers.
- 87 gr Hornady V-MAX, 39 gr Varget, CCI large rifle primers.


All well below 0.5 MOA for 5 shots groups. All using Winchester brass. Remington 40-XB "stock" rifle.

Have fun.
 
.243 Win
85gr Sierra GK HPBT
44.0 gr H4350
Fed GM210M
2.710"
3285ft/s.

Sav 12FV w/ 26" pipe
 
Last edited:
RP brass
CCI250
Imr4831, 45.5gr
105gr Speer, .030" gave me 3024fps in a 24" tube.
Didn't have a whoile lot of time to work with the load but this shot moa right off the bat.

Christy used this load for her Antelope,
c03824f3.jpg

I used it for three deer. Nice shooting but the bullets mentioned in my load are crap, they act like a varmint bullet and vaporize even on a Whitetail at 200 yards.
They are wicked on coyotes too.

I loaded up some Nosler Bal. Tips for a friend a couple years back, using cci200's and IMR4350@ 42.5gr. He only ever used this load on youtes as far as I know and although he never reported any group size, he said he never missed with them either! Velocity was 3030fps.
Noel
 
Back
Top Bottom