PICS OF ATR rifles POST'EM

B

bradtothebone

Regular
Rating - 100%
10   0   0
I guess Ill start the pics of ATR products....... Im the proud owner of 2 of ATRS rifle, and am gonna build a 3rd on the new ATRS action in probably .260AI.......When my wife gets wind of the #3, My new home will probably be behind the deep freeze in ricks place.....or else the trunk of troys BMW..... (I wont make a mess Troy.... Promise)

#1..338 LAI, Nesika Action, 31" mike rock 5r BBL, mcmillan A-5, HS precision bottom metal, jewel trigger, 8x32x56mm nightforce npr2 reticle.

savage009.jpg



#2. .22-250AI Barnard SM Action, Hs precision bottom metal 26" pacnor supermatch bbl, jewel trigger,Robertson f-class prone stock, NXS 5.5X22X56mm NPR2 optics.....

barnard009.jpg



Rick is also building another .338LAI for a buddy, and the same buddy as a .22-250AI twin to mine, cept different color.
 
Last edited:
Well here is my lowly contribution to this thread.
Nesika KT action
AICS 2.0, bedded
Rock 1 in 10 twist
Jewell trigger
Versa pod
NXS 5.5-22x56 R1 in NXS Rings
So far with handloads, as long as I don't do something stupid, they make a nice oddly shaped hole. If i miss with this, it wasn't the rifle if ya get me.

Mikes308.jpg

mikes3082.jpg

mikes3083.jpg
 
i am too poor to own one of the master pieces put out by ATR but one day when i finally finish building my home, and kick the newly aquired military vehicle bug i just might spend the $$ to have one built LOL
 
Well, my little mule Peppy is going to look slightly different after it comes back from getting repainted but here it is.
338LM AI
Nesika Action
McMillan Stock
Jewel Trigger
Nightforce 8-32x56 NPR1
TPS rings
Custom Brake
Picture.jpg
 
This was my first purchase through Alberta Tactical while I was still a customer. I had a budget and wanted a semi-auto accurate rifle. Rick told me it didn't exist so he put me into a Remington 700P bedded and triggered with a 4.5-14x40mm MK4, Farrel Rail and PRW rings. I concoured the 1km mark with this and I was sold on long range. It was a great rifle but had to sell it to fund the
338.
ATRRem700P.jpg
 
These are a few of my favorites.
Granted the Lahti I did not build, am only reactivating it, which is no small job.

lahti.jpg



1 of my 50s, built this 1 to go to Africa, unfortunately it was not ready when Africa was, I love this gun.
IMG_1848.jpg



My 338LAI , same as Glocks but right hand bolt and less paint, with 2280 lbs of Eland, and my Dad aka Knockknock
Africa128.jpg
 
alberta tactical rifle said:
Blackcloud Sorry about the no run out chamber on the 308, send it back and I can add few thou if you want.:)
Click to expand...

I've never yet put a fired piece of brass from anyones guns, including mine, on my concentricity gauge (with a very expensive dial indicator) and had no needle movement what so ever!

Until now! I ran Lapua brass fired through my new 308 over my mic and there was narry a quiver from the needle.:D

Usually you get a tiny flutter at the very least.

May be I'll ditch the bore guide and bash the crap out of the chamber for a while:eek:
 
Blackcloud said:
I've never yet put a fired piece of brass from anyones guns, including mine, on my concentricity gauge (with a very expensive dial indicator) and had no needle movement what so ever!

Until now! I ran Lapua brass fired through my new 308 over my mic and there was narry a quiver from the needle.:D

Usually you get a tiny flutter at the very least.

May be I'll ditch the bore guide and bash the crap out of the chamber for a while:eek:
Click to expand...

PLEASE do!!! I need all the help I can get to stand a chance of not making a fool out of myself at the BCRA. I can always build you another rifle, so have at er.:runaway:

If I remember correctly that is "urban" camo, but BC has abetter memory than I do.
 
You must log in or register to reply here.
Back
Top Bottom