- Location
- Montreal, Quebec
I found these plastic coated ladder hangers at Home Depot for $0.98/each.
The Grizz is 22" with the pistol grip installed.
These hagers are so robust, you could do chin-ups off your shotty.
The gun is mounted 6 1/2' off the floor. High enough to keep little hands off of it, and low enough for an adult to grab in an emergency. Remember, DO NOT KEEP IT LOADED as we want to respect the laws and give the BG a fighting chance.
The Grizz is 22" with the pistol grip installed.
- Measure required width of support. Place gun on hanger and mark with a pen.
- Put ladder hanger in a vise and bend with your hands (this takes a bit of forearm strength). If you don't have any forearms, use a hammer! Use hack saw to cut off excess length of hanger.
- Install hangers (screw into studs) at 16" centers. This supports the forestock and just behind the trigger guard. Total cost, $1.96 + tax. And it doesn't look bad at all!
These hagers are so robust, you could do chin-ups off your shotty.
The gun is mounted 6 1/2' off the floor. High enough to keep little hands off of it, and low enough for an adult to grab in an emergency. Remember, DO NOT KEEP IT LOADED as we want to respect the laws and give the BG a fighting chance.
Last edited:
