plain barrel or ribbed?

sp-10

CGN Regular
Rating - 100%
11   0   0
what does everyone perfer? i need to get a new barrel and i am not sure which one to get. the ribbed one is 45 us more. the gun will primarily be used as a upland gun so light weight is a must. which one should i get
 
Most barrels are ribbed these days. It helps with providing a flat sighting plane and if it's vent ribbed, it will help dissipate the mirage (wavy heat things that you see on a hot day flowing off surface).

However, a non-ribbed barrel isn't much of a disadvantage. If you practice with it, you'll probably be just as accurate and quick with it as with a vent rib.

Get what feels right.
 
I've always preferred a ribbed barrel - more natural line of site for me. I've always had a difficult time getting a non ribbed barrel aligned quickly, which s something I need to do for grouse, woodcock, etc. Probably a personal thing, but most folks that I have shot with prefer vent ribs.
 
As far as shooting I do not see much difference in the field.However I do like the look of the ribbed barrel better.
 
The other advantage of a rib is that it changes your sight picture, and removes the barrel as an obstruction.

By raising the sights off the barrel, you are less likely to completely obscure a low inbound (i.e. rising) target/bird with the barrel.
 
I started shooting non ribbed. Once I started shooting ribbed my shooting began to improve. Might just have been practice but when I go back to non ribbed my shooting seems to suck. I don't look down the barrel anymore for aiming. It doesn't make much sense, but I think it helps me.
 
The purpose of a vent rib is to disipate heat waves during extended shooting so you can focus on your bead. That right there is the key. If you spend too much time lining up your rib your wasting too much of it. You need to focus on your bead not the line going to it. If you can do that with either, pick your poison. Myself I prefer the rib only because it raises the bead just enough to make shooting comfortable with a straighter stock, but if I had a gun that didn't have it, I wouldn't feel at a disadvantage at all.
 
You don't really need a rib for a field gun, given that you won't likely be shooting it rapidly enough to cause heat mirage.

Personally, I prefer the uncluttered look of either a plain barrel or solid rib.
 
ribbed barrel will twist with heat. If you ever attempt shooting slugs through the same barrel you will know what I mean. Cold barrel will shoot a foot or two down at 100 yards, hot barrel will be a foot up above. Disgusting.
 
Back
Top Bottom