- Location
- campbell river bc
Does anyone have some kind of chart which shows the actual inside diameter of Ponsness Warren loader powder bushings. The lettering system that they use does not give any indication of the actual measurement
Ponsness Warren powder bushing sizes
- Thread starter jamcam1999
- Start date
Type "Ponsness Warren powder bushings sizes" into Google.
S&W Supply has a chart that should that will come up about 6 results down, that gives the dimensions for the PW bushings, allowing comparison with the interchangeable Hornady, RCBS or Spolar bushings that reference their internal diameter as the size.
S&W Supply has a chart that should that will come up about 6 results down, that gives the dimensions for the PW bushings, allowing comparison with the interchangeable Hornady, RCBS or Spolar bushings that reference their internal diameter as the size.
F ----- 0.3800"
f1 ---- 0.3850"
f2 ---- 0.3950"
g ----- 0.4125"
g1 ---- 0.4155"
h ----- 0.4290"
i ----- 0.4365"
j ----- 0.4450"
j1 ---- 0.4515"
k ----- 0.4545"
l ------ 0.4645"
m ----- 0.4775"
n ----- 0.4925"
o ----- 0.4955"
p ----- 0.5300"
q ----- 0.5045"
r ----- 0.5150
f1 ---- 0.3850"
f2 ---- 0.3950"
g ----- 0.4125"
g1 ---- 0.4155"
h ----- 0.4290"
i ----- 0.4365"
j ----- 0.4450"
j1 ---- 0.4515"
k ----- 0.4545"
l ------ 0.4645"
m ----- 0.4775"
n ----- 0.4925"
o ----- 0.4955"
p ----- 0.5300"
q ----- 0.5045"
r ----- 0.5150
- Location
- campbell river bc
PW bushing size chart
Thank you sir. At one time I made a complete set of bushings for my PW800B loader but have since sold it with the bushings and no longer have a lathe to make more. Another big mistake I have made in my life.
Thank you sir. At one time I made a complete set of bushings for my PW800B loader but have since sold it with the bushings and no longer have a lathe to make more. Another big mistake I have made in my life.
Last edited:
