Portable target stands

[p14shooter]

Is there a company out there in Canada that sells lightweight target stands? What do you guys use? Yes I know I could build one, but I am real handsome, not real handy so one that is ready to go is ideal. I have looked at a few including cabelas and some of our sponsers, but I can not find one. Any help would be appreciated.

paul

 

[cyclone]

Avalonthas made a brilliant one out of PVC pipes/joints....

 

[Wolfe1]

cdn tire sells a auto resetting target product #75-7091-2 for 44.99 all steel light weight and very durable for .22cal has 5 metal targets you hit the middle 1 last it resets all of them

 

[KnightShift]

I am real handsome, not real handy

I can't wait to use this line

LeBarons has a decent selection of portable target stands for different calibers. I made my own up out of some scrap would and a trip to the dollar store (I cant be bothered to spend ammo money on a target stand), but then again, I'm fairly handy and ugly as sin

 

[M77]

I don't use metal "reactive" target's myself. For something simple to stick into the ground and shoot at I use "lost" stick in signs that we see during elections. They are metal wire framed and use chloroplast board (plastic cardboard). Just remember to paint over names or any human picture that is on them. They are extremely light and can take 100's of rounds before the board is shot out.

 

[RMXC51]

cdn tire sells a auto resetting target product #75-7091-2 for 44.99 all steel light weight and very durable for .22cal has 5 metal targets you hit the middle 1 last it resets all of them

Wholesale sports has ones like that. I have one, plus one with three small swinging steel circles of different sizes. Fits nicely under the truck seat.

 

[Ron AKA]

Election signs.

 

[Avalonthas]

I will post up my system tonight or tomorrow night. Depends if i finish my work project early or not

 

[cyclone]

Election signs.

Esp. NDP ones : they literally look like bullseyes...

 

[Cedarstrip]

portable target stand

I just use a chunk of scrap plywood, about 2' X 3', with two 2" X 2" legs screwed down along the sides. A third piece of scrap wood with a notch in one end props it up from the back side. Put a couple of nails sticking out of the top to hold the tin-cans and you're good to go.
Lays down flat, cost me a total of 5 minutes to Bubba together.

 

[kombayotch]

Any Realtor should be able to tell you where to buy the "Open House" stands locally. Those work wonderfully...

 

[KnightShift]

Try this:

http://www.signsinthemaking.com/

Large variety of signs and stands, some are pretty cost efficient.

 

[cal_h]

ht tp://www.rollingsteeltargets.com/Steel-Targets/Impact-22-Rolling-Steel-Target.html

a google search for, rimfire reactive targets , brings up lots of ideas


luck
cal

 

[elimsprint]

I have a couple of these, ht tp://www.mtmcase-gard.com/products/shooting/target-stands-jmts.html $24 at WSS ht tp://ca.wholesalesports.com/storefront/range-accessories/targets/the-jammit-target-stand/prod78010.html. I really like them and use them all the time. They are over 2 years old now and still work just fine.
Kim

 

[oopswasthatyourdog?]

cardboard box with a log inside for weight......folds flat when not in use, takes 100's of rounds then you drop it in the recycling bin......cheap and easy.

 

[Farmer Harv]

ht tp://www.rollingsteeltargets.com/Steel-Targets/Impact-22-Rolling-Steel-Target.html

a google search for, rimfire reactive targets , brings up lots of ideas


luck
cal

I just ordered one of these a couple of weeks ago. Looks like it works well, and is hopefully durable. Shipping to Canada was only ~$14 too, which was a nice surprise.

Is there such a thing as having too many rimfire targets?

 

[oopswasthatyourdog?]

ht tp://www.rollingsteeltargets.com/Steel-Targets/Impact-22-Rolling-Steel-Target.html

a google search for, rimfire reactive targets , brings up lots of ideas


luck
cal

That looks awesome!

 

[cal_h]

when they don't make what you want.......... make your own