Powder through expander on Pro Chucker 5 powder measure?

[COREY]

I have a Hornady LnL AP that I use powder through expanders in with the lock bar on the side. I then use a powder cop die to check my powder charge with a seating die and a crimp die.

I was looking at the RCBS PRO Chucker 5 as a second press (load for 6 pistol rounds). Can you set up the RCBS powder measure the same way as the Hornady?

 

[diopter]

No reason you can't use another Hornady measure on the RCBS press without the quick detach die bushing or use the Uniflow with their expanders.
https://www.rcbs.com/powder-measure/progressive/353701.html

 

[diopter]

Can't find anything on a RCBS equivalent to the Hornady PTX Powder Measure Stop, a great inprovement to set up the case activated powder rotor travel.

But I notice that the RCBS equivalent progressive powder measure linkage looks identical to the Hornady system.
You may be able to use the Hornady Powder Measure Stop on the RCBS measure.

https://www.precisionreloading.com/cart.php#!l=HN&i=290049


https://www.rcbs.com/powder-measure/progressive/