Prairie gun works trigger?

U

Umingmak1970

New member
Rating - 0%
0   0   0
Good day. I am trying to adjust the trigger weight on a PGW coyote. Figured I would do a quick Google search and find out what trigger is on it and go to the manufacturer website for the instructions. Well I guess my Google fu in not that good, all I could find is that it might be a riflebasix or a triggertech. Pulled the action out of the stock to see if any markings on the trigger, nothing. It has two Allen key set screws with jam nuts on the front of the housing. Could anybody tell me which trigger were installed from PGW on there coyote? Thank you and have a good day
 
It's a TriggerTech. There's a set screw just in front of the trigger, lefty lighty righty heavy. My PGW is an m15, but I believe they're the same. I have to take the action out of the stock because I don't have any Allen keys that fit under the trigger guard.

Edit: just realized that I have you information you already knew, my bad.
 
Take one set screw completely out. You should be able to determine what it does and adjust accordingly. If you can't figure it out from that screw, remove the other set screw and you now should be able to figure it all out. After you have made the adjustments test it well by slamming the bolt closed hard and quickly... make sure it stays cocked with rough handling.

Or you could always make an adjustment on one set screw keeping track of where it is originally set so you can go back to that setting... Normally one screw is going to be for weight... test adjustments just on one screw until you figure it out.
 
Last edited:
If it is a recent production, my bet would be on the trigger tech. If I recall correctly last time I was there, was 2019 and they only had the trigger tech.

....But the above advice is the best.
 
You must log in or register to reply here.
Back
Top Bottom