- Location
- Toronto
We are excited to continue the launch of our exclusive housing, the NVG ALPHA
The NVG ALPHA is only available directly from us or from one of our authorized distributors globally
The NVG-ALPHA is a full featured, ruggedized night vision binocular made of both polymer and aluminum. Polymer is used to reduce weight while aluminum is used for strength in critical areas.
The ALPHA was designed with you the end user in mind. When articulated outwards the automatic independent pod shut off kicks in to mitigate splashback and light damage to your tubes. All electronic device features are controlled with the single central rotating push button. Manual gain can be adjusted by turning the knob. Gain memory allows the device to recall your settings when turning the device on and off. The power button requires a 1 second hold to power to reduce the chances of accidental device activation. Further button press sequences control your IR illuminator as well as toggling ON/OFF the different auto shutoffs and allow you to conduct a factory reset of the board if needed. The rear mounted interpupillary stops are extremely intuitive to adjust. Rolling the adjuster outward moves the pod outward, and rolling the adjuster inward adjusts the pod inward allowing a tailored fit to your anatomy.
>>>STORE LINK<<<
We appreciate the support you've given us over the years and we love to see you enjoying our devices.
The NVG ALPHA is only available directly from us or from one of our authorized distributors globally
The NVG-ALPHA is a full featured, ruggedized night vision binocular made of both polymer and aluminum. Polymer is used to reduce weight while aluminum is used for strength in critical areas.
The ALPHA was designed with you the end user in mind. When articulated outwards the automatic independent pod shut off kicks in to mitigate splashback and light damage to your tubes. All electronic device features are controlled with the single central rotating push button. Manual gain can be adjusted by turning the knob. Gain memory allows the device to recall your settings when turning the device on and off. The power button requires a 1 second hold to power to reduce the chances of accidental device activation. Further button press sequences control your IR illuminator as well as toggling ON/OFF the different auto shutoffs and allow you to conduct a factory reset of the board if needed. The rear mounted interpupillary stops are extremely intuitive to adjust. Rolling the adjuster outward moves the pod outward, and rolling the adjuster inward adjusts the pod inward allowing a tailored fit to your anatomy.
Key Features:
- Robust aluminum hinge design
- Variable gain with all Photonis tubes and some NNVT tubes
- Gain memory remembers gain settings even when turning device off and on
- Individual pod shutoff when articulated (feature can be toggled ON/OFF)
- Automatic shutoff when flipped past vertical (feature can be toggled ON/OFF)
- 2 minute idle shutoff mitigates damage from devices being left on when not in use (feature can be toggled ON/OFF)
- Intuitive and ruggedized interpupillary stop design redirects all impact forces inwards into a reinforced aluminum plate
- Powered by single CR123A battery
- Optional remote battery pack with external 4 pin Fischer port
- Mount compatibility for remote power: Wilcox G24 Lite, Wilcox G69, Cadex Low Profile Flip Up, Argus A4
>>>STORE LINK<<<
Trade up Program
All customers who previously purchased their complete binocular device from Opfor Night Solutions are invited to trade up their housing to the NVG-ALPHA at a special loyal customer price of $1000 CAD, labour included.We appreciate the support you've given us over the years and we love to see you enjoying our devices.
Last edited:
