PW bushing and clays powder

[Fassteel]

Boys

Just got my first jug of clays powder and of course my old manual doesn't list any bushing info for this powder. Looking to load 7/8oz loads. Anyone know which bushings I should be using?

Thanks FS

 

[Win/64]

You should use the bushing that throws the desired weight for what you are loading. Never go by bushing size always go by weight.

 

[rembolt]

The hodgdon online data in your friend.that is if your loading 12ga as it doesn't show data for any guage smaller than 16ga.

 

[Fassteel]

You should use the bushing that throws the desired weight for what you are loading. Never go by bushing size always go by weight.

I have used the bushing chart with PB and Green Dot and the drops are within a couple of 1/10ths of grains. FS

 

[M12shooter]

Try posting at shotgunworld.com, reloading forum. Top notch reloaders there and a wealth of informaton. Mind me asking what you payed for a jug of Clays?

 

[Win/64]

'''''

 

[Fassteel]

'''''

Any 7/8oz wad
Any 209 Primer
Any Plastic hull
Any 7/8oz load for clays powder

'''''

 

[Win/64]

This is off the Alliant website it is for Clay Dot which is Alliants copy of Clays, And is a direct substitution.
http://www.alliantpowder.com/reloaders/powderlist.aspx?type=2&powderid=21&gauge=12

Always weigh your loads.

 

[doubleman]

Winchester "AA" hull
Win 209 primer
WWAA12SL wad
16.9grns Clays = 1200 fps P/W bushing I
18.1grns Clays = 1250 fps P/W bushing K
19.7grns Clays = 1300 fps P/W bushing M
P/W shot bushing #4
Regards