Quad Rail?

B

Black slide

Regular
EE Expired
Rating - 100%
4   0   0
Location
Alberta
Hello I am looking for a quad rail for my Norc M4. I want something that will last and function well, however do not want to spend a lot.
Is NCSTAR garbage?

Anyone heard of Tufforce?

Can anyone recomend something good & affordable.

Thank you

Black Slide
 
rail

tuff force is garbage....NC star not far behind it. your going to have to spend at least $200. ish to get something decent,JP,Troy, Daniel Defence,POF would be my top pics in the Free float types. IMO
 
or better yet, cut down the factory front sight to keep the pinned gas block.
Click to expand...

I'd advice against this.

At some point in the future you'll probably want that front sight gas block and barrel on another build. Trust me. I've rebuilt a few AR's.

Spend a bit of extra money and take everything off the upper. Rebuild it with new barrel, new gas block and tube and new rail system.

Save your upper, BCG, and charging handle.

I just did one this weekend that replaced everything but the upper, BCG and charging handle.

Best way to go.


BUT!!! what the OP needs, is the Daniel Defense EZ carbine rail. We have like tens of thousands of these on order because they are that good.
 
Farmboy said:
I'd advice against this.

At some point in the future you'll probably want that front sight gas block and barrel on another build. Trust me. I've rebuilt a few AR's.
Click to expand...

Given the reports of the difficulty guys are having taking apart Norinco uppers that may not the easiest option.

Getting a rail that doesn't require any mods is the best option, like you pointed out.

I cut down the FSB on my Armalite. Trust me. It works. And it's free.
 
I cut down the FSB on my Armalite. Trust me. It works. And it's free.
Click to expand...

I've cut down more than a few to fit under KAC URX's ;)

It does work, I know. It just sucks, when you want to use the same barrel on a new build and you've already dremelled the FSB.

Given the reports of the difficulty guys are having taking apart Norinco uppers that may not the easiest option.
Click to expand...

Meh. Remove the gas tube from the FSB and then pull everything apart. I got hung up on that this weekend, trying to remove the FSB, the gas tube option was then pointed out and it was simple after that. You get focus on something and all else doesn't matter sometimes.

Mind you I haven't touched a norc yet. :D
 
Farmboy said:
I'd advice against this.

At some point in the future you'll probably want that front sight gas block and barrel on another build. Trust me. I've rebuilt a few AR's.

Spend a bit of extra money and take everything off the upper. Rebuild it with new barrel, new gas block and tube and new rail system.

Save your upper, BCG, and charging handle.

I just did one this weekend that replaced everything but the upper, BCG and charging handle.

Best way to go.


BUT!!! what the OP needs, is the Daniel Defense EZ carbine rail. We have like tens of thousands of these on order because they are that good.
Click to expand...

My $200 project has become a $1000 project lol. I did plan on installing a quad rail gas block, but if that will not do the trick I think I will sit on this for a while so I don't compromise anything.

I appreciate the advice

Thx

Black slide
 
Black slide said:
Well I want to build a well rounded & reliable AR that will allow accessories suck as flip up sights, flash light, red dot...ect.

Thx

black slide
Click to expand...

Has anyone purchased the following from Marstar? Looks good to me!

http://www.marstar.ca/ac-AIM/Mounts.shtm

- AR15/M4 2 Piece Free Float Carbine Lenght Quad Rail W/Extension
 
You must log in or register to reply here.
Back
Top Bottom