Question about Ammo for DA Socom 18 (M14)

SIG FAN

CGN Regular
Rating - 100%
11   0   0
Location
Eastern Ontario
Hey Guys,

I picked up a box of Remington .308 180 grain ammo. Is this ok to use in my Dominion Arms Socom 18? I've heard anything above like 168 grain or something could damage the gas system. Is that true? I've only got 20 rounds of this stuff.

Thanks! :d
 
A little heavy but I'm sure they should work fine. Find some Norinco .308 for your SOCOM18. I've had no issues blasting it out of both the M305 Shorty and SA SOCOM16.
May not be the most accurate stuff but shoots great for the cost per round.
 
There is no issue shooting them....any 308 you put in there will go bang and come out the end.

And yes the gas system, and bolt will take a beating if you go over a certain weight of bullet
 
180gr is probably on the heavy side. I wouldn't want to shoot it in my rifle. Not semi auto anyway. If you turn off the gas it would be just fine, but then you have a straight pull rifle :dancingbanana:
 
I found an old post by Lazerus2000 (in the sticky section in this forum), that stated the following;

If you stray too far from 7.62 NATO standards regarding bullet weight and pressure, you can get into durability, reliability, and accuracy issues. The M-14 was designed for 150 gr bullets, with military powders tailored to have the correct pressure characteristics at the gas port. The twist in the M-14 barrels likes 168 gr bullets for excellent accuracy. Those who choose heavier bullets at high velocity, for hunting or for long range target shooting, will have to be aware that recoil from these heavier bullets can do significant damage to the M-14 rifle. Those who go too light, either in bullets or in powder, may find the gas left over at the port may not have enough power to operate the mechanism reliably and consistently. That being said, I have tested a few M-14 rifles with the sabot loaded Remington .223 55 Gr Accelerators, and this makes for a reliable shooting load, with no recoil, that may be accurate in your individual M-14. As usual, with individual opinions and experience, your personal mileage may vary.

The M-14 rifle is incredibly sensitive to variations in ammunition, and some loads may shoot MOA out of your individual rifle, while others are closer to hour of angle. Best advice I can give on ammunition, is to try as many different brands, weights, and types of ammo, 7.62 NATO Ball and .308 Winchester, to find what your individual rifle likes. Then buy a case of it.
 
180gr is probably on the heavy side. I wouldn't want to shoot it in my rifle. Not semi auto anyway. If you turn off the gas it would be just fine, but then you have a straight pull rifle :dancingbanana:

^THAT is what you should be doing with ANY 'heavy' projectile in the M14... Shooting the 180's will lead to damage...

Oh, and the Norinco 308 runs like a HOT DAMN in my M14, LOVE IT!!!

Cheers
Jay
 
Laz's old post aside... The accepted range of bullet weights in these(and real M14) rifles is 147gr to 174gr.
Best to keep your 180's for a bolt gun and keep within the rifle's design parameters. A bent oprod is the first thing that will happen if heavy loads are used. Bolt rollers have been known to blow apart when using heavy loads, ect ect
 
180's are definitely heavy for the m14. They will beat your gun up and you could bend an op rod amongst other things. Stick to lighter fodder.
 
Back
Top Bottom