beer__guzzler
Member
- Location
- new brunswick
Anybody have quickload that thay wouldn't mind running some numbers for me?
Quickload anyone?
- Thread starter beer__guzzler
- Start date
Fastestmanalive
Regular
- Location
- Quebec City
+1 for GRT. Works great
To get accurate info from Quickload you need the case capacity from a case fired in your chamber. Quickload defaults to cases with the least capacity and increase chamber pressure if not correct. And with my .223 it means the chamber pressure will read 5,000 higher than actual with the same powder charge. Next, you need a chronograph and adjust the burn rate in Quickload until the velocities match each other. After this is done the chamber pressure in the Quickload guesstimate will be closer to actual "BUT" not spot on.
Last edited:
beer__guzzler
Member
- Location
- new brunswick
beer__guzzler
Member
- Location
- new brunswick
Looking for this but with 99.2 h20 capacity and 140 vld hunting at 3.520 coal and rl50 powder. Just had one built and broke it in. Now I'm looking for a good starting point.
