Range Report Les Baer UTC

DSG03

DSG03

Regular
Rating - 100%
9   0   0
Location
GMT-5 (-4 DST)
My original thread:

http://www.canadiangunnutz.com/forum/showthread.php?t=767465

For those interested here is my range report on 1911forum.com:

http://forums.1911forum.com/showthread.php?t=372563
 
Very nice RR DSG03. If you want to avoid those left from the POA groups at farther distances you'll have to work your finger position on the trigger or drift the rear sight to the right 1/16th of an inch!

But since that half of your rounds are quite centered you just have to watch that bad trigger squeeze habit!

Enjoy that nice piece!

Good Shootin'

H.C.
 
Thanks!, First day with it and my first 1911. Closer to center got better during the 250 rounds. I figured it might be my finger. The trigger is new to me. Caught me by suprise a few times. No rounds through the ceiling though. After 1000 or so I'll look at drifting the rear right. My buddy grouped left as well.
 
DSG03 said:
Thanks!, First day with it and my first 1911. Closer to center got better during the 250 rounds. I figured it might be my finger. The trigger is new to me. Caught me by suprise a few times. No rounds through the ceiling though. After 1000 or so I'll look at drifting the rear right. My buddy grouped left as well.
Click to expand...

Very nice...are you waiting for the 500 rounds before field-stripping?

OK:)
 
okcorral1881 said:
Very nice...are you waiting for the 500 rounds before field-stripping?

OK:)
Click to expand...

Just pulled a bore snake through twice at the end. I'll oil the barrel hood, what I can of the rails and a drop on the disconnector. I won't field strip until after I put a total of 500 rounds through it. The slide is very smooth already and not overly tight.
 
You must log in or register to reply here.
Back
Top Bottom