rattling clip mk4
- Thread starter madmax123
- Start date
Bazzoka_Joe
Regular
- Location
- PRQ(People Replublic of Quebec)
are you talking of the mag or a stripper clip ?!?
Bazzoka_Joe
Regular
- Location
- PRQ(People Replublic of Quebec)
did you try another mag ? you can look if the ''mag lock'' is not worn out
Try gently tapping the back face of the mag body outwards, it will tighten things up. The mag sometimes is made a wee bit undersize or the sheet metal gets compressed with use. Moving that back rib only 1/32 inch outwards usually will do it..
You need to dismantle it and jig it up in a vise or wood blocks and tap the back from the inside with a hardwood drift. Not easy to do without an extra pair of hands to help and hold the thing still while you tap at it. Gentle taps and retry in the rifle often.
You need to dismantle it and jig it up in a vise or wood blocks and tap the back from the inside with a hardwood drift. Not easy to do without an extra pair of hands to help and hold the thing still while you tap at it. Gentle taps and retry in the rifle often.
Last edited:
