Thanks. I bought one of these on Ebay (new) and when I opened the box there were two of the three screws that hold the motor in place sitting in the bottom of the box. I don't know if Customs took this thing apart or not as it came from the States. I plugged it in and it is dead. I turned it over and noticed that there is a 'clunk' noise as the 'stations' move a bit. (I can grab the pieces in the stations and move them up and down a little bit.) I put the screws back into it and the motor doesn't move around any more. I used a flashlight to look through the slots on the bottom of the machine and it looks like the loose motor swung around and knocked one of the wires off the power switch. I'm wondering if I should just send it back for replacement or open it up and hook the wire up and use the thing.