RCMP "Information Regarding 80% Lowers"

Wolverine .303

Wolverine .303

Business Member Rep
Location
Lattitude - 49.89617 | Longitude - 100.85384
Released Today.......

http://www.rcmp-grc.gc.ca/cfp-pcaf/pol-leg/receiver-carcasse-eng.htm

Information on Receiver Blanks (80% Receivers)

Receiver blanks are firearms as defined in Section 2 of the Criminal Code for the following reasons:

A receiver blank is a nearly complete receiver of a firearm and falls within the adaptability clause of the definition of firearm.
The manufacture of a receiver blank has proceeded to the point where it is no longer useful for any purpose other than the receiver of a firearm; receiver blanks are only destined to be firearm receivers.
Receiver blanks are available as separate components but are often sold as part of a kit, which includes the receiver blank plus the all necessary equipment and tools to complete the receiver and the spare parts to assemble the receiver into a working firearm. They can be classified as non-restricted, restricted or prohibited based on Section 84(1) of the Criminal Code. The most common in Canada are for Colt M1911, SIG 226 and Glock 17 pattern handguns (all restricted firearms); and receiver blanks for AK-47 and AR-15/M16 pattern rifles (both prohibited firearms).

When a receiver blank is inspected by the Canadian Firearms Program and determined to be a firearm, it will be published in the Firearms Reference Table (FRT).

Future import and retail sales of receiver blanks will be available only to individuals or businesses that have the appropriate firearms licence. Restricted and prohibited receiver blanks must be registered.

Affected products

The table below identifies many of the receiver blanks known to be in circulation. Variations of the products listed are possible. The classification listed in the table applies to the unmodified receiver blank. The classification of a firearm made from one of the receiver blanks may differ.

AK-47 assault rifle ------> Prohibited Many variations possible
AK-74 assault rifle ------> Prohibited
AMD-63 assault rifle ------> Prohibited Variation of the AK-47
AMD-65 assault rifle ------> Prohibited Variation of the AK-47
AR-15 (M16) rifle ------> Prohibited The receiver blank can be made into either an AR-15 rifle or an M16 assault rifle
Beretta 92 pistol ------> Restricted
Beretta AR70 assault rifle ------> Prohibited
Carl Gustav m/45 submachine gun ------> Prohibited
CETME rifle ------> Prohibited
Colt M1911 pistol ------> Restricted Many variations possible
CZ 26 submachine gun ------> Prohibited
FBP 9 submachine gun ------> Prohibited
Galil assault rifle ------> Prohibited
Glock pistol ------> Restricted Many variations possible
HK 91 rifle ------> Prohibited
HK G3 rifle ------> Prohibited
KP 44 submachine gun ------> Prohibited Similar to the PPS-43
Krinkov assault rifle ------> Prohibited Variation of the AK-47
MG 42 light machine gun ------> Prohibited
M249 light machine gun ------> Prohibited
M3 (M3A1) "grease gun" submachine gun ------>Prohibited
PKM machine gun ------> Prohibited
PPS 43 submachine gun ------> Prohibited
PPSH 41 submachine gun ------> Prohibited
Ruger 10/22 ------> Non-restricted
SIG P226 pistol ------> Restricted
SIG P228 pistol ------> Restricted
SIG P229 pistol ------> Restricted
Sten Mark II submachine gun ------> Prohibited
Sten Mark III submachine gun ------> Prohibited
Sten Mark V submachine gun ------> Prohibited
Steyr MPi-69 submachine gun ------> Prohibited
Suomi submachine gun ------> Prohibited
Swedish K submachine gun ------> Prohibited Similar to Carl Gustav M/45
Tantal assault rifle ------> Prohibited
Vz58 assault rifle ------> Prohibited
Vz61 Scorpion submachine gun ------> Prohibited Many variations possible
Yugoslavian M56 submachine gun ------> Prohibited
Zastava M72 light machine gun ------> Prohibited

 
Last edited:
"The manufacture of a receiver blank has proceeded to the point where it is no longer useful for any purpose other than the receiver of a firearm; receiver blanks are only destined to be firearm receivers."

But what happens if I want to make AR15 lower receiver door stoppers? :rolleyes:
 
MFG - so now "this guy I know", who has "some" 80% AR15 lowers, is now in possession of prohibited "firearms"?? We have officially gone full retard.
This country and its firearms paranoia is out of control.

Mean while back on the streets of this once proud country, we have free needle exchanges, safe space for shooting up illegal drugs, and then the resulting destroyed careers, families, and resulting deaths; not to mention an insane burden on our medical system.

But that's OK, drug abuse is acceptable to our society, but firearms are not.
 
So now the RCMP says 80% ar lowers are prohib!?

Gun Orgs, where art thou? (Although considering all the action happening in the 10/22 mag front, I doubt they'll get anything moving here either...)
 
xURSOx said:
"The manufacture of a receiver blank has proceeded to the point where it is no longer useful for any purpose other than the receiver of a firearm; receiver blanks are only destined to be firearm receivers."

But what happens if I want to make AR15 lower receiver door stoppers? :rolleyes:
Click to expand...

Or mailbox?
 
Bonemaker said:
MFG - so now "this guy I know", who has "some" 80% AR15 lowers, is now in possession of prohibited "firearms"?? We have officially gone full retard.
This country and its firearms paranoia is out of control.

Mean while back on the streets of this once proud country, we have free needle exchanges, safe space for shooting up illegal drugs, and then the resulting destroyed careers, families, and resulting deaths; not to mention an insane burden on our medical system.

But that's OK, drug abuse is acceptable to our society, but firearms are not.
Click to expand...


Add to that, the resulting property crimes, which are nice and safe for the most part to investigate, are far more preferable to anything dangerous. Gotta disarm us before turdtwo goes full Venezuela on the economy.
 
Same story as always. We will all complain and talk about how wrong it is, the injustice, makes no sense etc.
The only valid gun organization in canada, the CSSA will make comments about it but essentially do nothing.
Time will pass and we will all accept this and move on.

If the gun owners in this country dont assemble en mass, which is what the CSSA SHOULD be organizing... and show our strength, NOTHING will change.

If this happened in the US the NRA would organize in a matter of days, thousands... if not hundreds of thousands of PEOPLE (like you and me) would assemble all over the country and things would change. But here, we just look out our windows wondering why this happens to us.

This is the CSSA's job... represent us... but also organize us. I think they are a professional organization, but I think they, in reality, do very little. Its time to stop talking and start DOING. Where do you want me to show up and when... ill be there.
 
You must log in or register to reply here.
Back
Top Bottom