Reamer Exchange Thread? (Reamer bank) & other tools barrel / action wrenches & vices

[Ardent]

Reamer Exchange Thread? (Reamer bank) & other tools barrel / action wrenches & vices

How about a thread for lending / renting / swapping chamber reamers? We are sorely lacking in the rental reamer catalogs up here, I know a good few of us hobby smiths have a few on hand. Together we might be able to put together a decent list.

PM me if you need any of mine, small rental fee for no swap for wear on tools, free if we both have tools we need.

I have:

.475 Morrison, PTG reamer (a 2 1/2" .475 Expess cartridge based on a blown out straight .45x2.6" Starline case, can rechamber .475 Linebaugh Ruger No.1's)

.416-450/400 3", a standard .450-400 3" but with a .416" bullet/groove.

7x57, Manson reamer

.257 Roberts, Manson reamer

.250 Morrison, PTG reamer (a .25 Hornet Improved, essentially)

.25 Throater

-More, need to hunt when home


Headspace Gauges:

.257 Roberts & 7x57 Go and No Go


Tools:

Barrel / Action wrenches, professional, will do any bolt action, M14, etc
Colt SAA Frame wrench, and barrel vise (supported frame wrench)
Numerous taps & dies etc, all slot screwdrivers etc English & American

 

[Jamie]

I like this.....it is stuck


shooters helping shooters

 

[Ardent]

Thanks Jamie, was just PM'd by a fellow with 75+ reamers as well, seems we can make it happen if somebody needs it, look forward to others adding.

 

[358]

I'll bite.

223
223 Ackley
6.5/284
300 Win.
458
6.5/06
may be others. Mark

 

[Mad_Mikee]

I'm looking for a 6.5 Creedmoor reamer with go and no-go gauges. Anyone have anything like this?

 

[Andy]

I have a bunch, and don't lend or rent them (I either sell or keep for future guns), but might swap it out to someone I can trust if they had a reamer I wanted.

I had one that I rented to ream one gun, and it ended up rechambering three guns (one of the other guys PM'd me to thank me!). Game over.


458 Win Mag
45-90
45 Cal Throater
357 Maximum
8X63
6.5-300 Win Mag
6.5 RUM
303 Brit Throater

It's one of the Ackleys or Wildcats that would interest me most.

 

[jomarz]

30/30 reamer

I'm looking for a 30/30 finishing reamer, anyone have one for sale? found one
thanks joe

 

[ckid]

I am looking for a .25-06 AI reamer if anyone has one surplus to their needs....

 

[growler]

gone

 

[nanuk]

hmmm...

 

[gabrielguitars]

.32-40 Winchester
.38-45 Bullard
9.3 X 62 (now gone)
.40-65 WCF
.408 throater

 

[pmatuk]

30m1 carbine/44 automag

I am looking to purchase a used 30m1 cabine finishing reamer for a project if you have one andwant to sell or rent?? either way I am intrested in oneand the second one is a 44 auto mag reamer ,or if you have these I need 1 of each chambered and are willing to do them for me tks

Both projects completed no longer looking

 

[gerard]

I'm looking to rent a 22 Hornet finishing reamer. Does anyone have one to rent? I'll pay shipping both ways.
Thanks Gerard

 

[sametwinnie]

Looking for a muzzle crowning tool with .311 pilot (.303 british) I need a flat one or 11 degree. Must be about .75 in diameter.

Thanks

 

[22to45]

would like to beg borrow steal rent or buy a 6.5x55 AI reamer and go no go gauges.
Seriously, happy to pay for it.

 

[Allen Gun Works]

Need a .308 finish reamer. Have 7.62NATO rough and finish to trade.

 

[sawzall]

I'm looking for a .445 super mag chamber reamer to either rent or buy. Thanks.

 

[firsttimer]

Looking for a 22-243or 220 howell or 22-06 to rent.

Thanks

 

[double gun]

gone

 

[Rdcollector]

I have the following finishing reamers
22lr
22 hornet
44rem mag rifle
32-20 win
303british