15567: An excellent source for reloading data(If you don't already have a loading manual, etc.) is the Hodgdon Reloading website. The site is very easy to use and contains load data for multiple calibers, powder types and bullet weights. Its a great resource which I use all the time. It should be of value to you, too.
This info may be useful. ..Trail Boss: I achieved a good balance of accuracy/performance with Trail Boss, when charge weights were kept to around 80-85% of maximum (As determined by the Hodgdon formula). This was consistent across a number of calibers and cartidges, including: .45 Colt. Of course, your guns will soon show you what they prefer. So, I still recommend starting at the minimum charge weight and working your way up to the optimal load. Just like you would, when developing a load for any cartridge.
Since the seller returned your money...I don't believe a negative rating is necessary. The guy acted like a real jerk(I suspect because he knew he was selling you an overpriced, or possibly defective gun)....but you will run into that type, from time to time. My advice: Ignore him and move on.
As for not taking a 'take-down' model '97 down. Total nonsense! These guns aren't at all complicated to take down and re-assemble....provided you pay attention to the correct sequence to follow. You can likely find detailed instructions on how to do just that, on you tube.
Note: Out of curiosity, I typed in : Winchester 1897 takedown. A you tube video describing the process appeared, within seconds.
By the way, you may be interested to know that Norinco makes a replica Model '97. You can find them on the Marstar website. Marstar is also a site sponsor. I've heard mixed reviews for these guns. Whether one of these interests you or not, it may still be worth a look.
Anyway, hope this further info is useful. Some good advice from posters here, already.
Al
This info may be useful. ..Trail Boss: I achieved a good balance of accuracy/performance with Trail Boss, when charge weights were kept to around 80-85% of maximum (As determined by the Hodgdon formula). This was consistent across a number of calibers and cartidges, including: .45 Colt. Of course, your guns will soon show you what they prefer. So, I still recommend starting at the minimum charge weight and working your way up to the optimal load. Just like you would, when developing a load for any cartridge.
Since the seller returned your money...I don't believe a negative rating is necessary. The guy acted like a real jerk(I suspect because he knew he was selling you an overpriced, or possibly defective gun)....but you will run into that type, from time to time. My advice: Ignore him and move on.
As for not taking a 'take-down' model '97 down. Total nonsense! These guns aren't at all complicated to take down and re-assemble....provided you pay attention to the correct sequence to follow. You can likely find detailed instructions on how to do just that, on you tube.
Note: Out of curiosity, I typed in : Winchester 1897 takedown. A you tube video describing the process appeared, within seconds.
By the way, you may be interested to know that Norinco makes a replica Model '97. You can find them on the Marstar website. Marstar is also a site sponsor. I've heard mixed reviews for these guns. Whether one of these interests you or not, it may still be worth a look.
Anyway, hope this further info is useful. Some good advice from posters here, already.
Al
Last edited:




















































