Reloading 270 winchester with CFE223, TABLES FOR 130 GR BERGER& WHERE's the powder?

Vettek50

Vettek50

Regular
Rating - 100%
8   0   0
Location
calgary,ab
Reloading 270 winchester with CFE223, TABLES FOR 130 GR BERGER& WHERE's the powder?

have looked internet, load tables for 270 winchester, i want to use CFE223 WITH 130gr BERGER, HPBT,,???, but no listing. it would be nice to use only one powder..yaya,

I have tables for cfe223, 110gr sierra hpbt, super great, 3/8"- 5 shot groups @100yds,,

and where ,whom has the powder? PM me only PLZ
 
CFE223 is a bit on the "fast" burning side for your 270 with the 130 grain pill.

A slower burning powder will be much more suitable.

Regards, Dave.
 
I know.... but ya know powders have unique performance like 4831 in 270...however that said . I want to load CFE223 IN 130GR BERGER,270cal dont care if there are better powders...Wouldn't it be nice to have only ONE powder . So with that in mind, has anyone loaded or have access to load tables regarding 130gr hpbt berger (or similar bullet) and cfe223? If you know please forward info to PM.

Thanks. If not, proof of the obvious may not fit the question.

Regards...
 
It hasn't been published for a reason then....

If you want a powder that does everything trailboss will work in everything, just don't expect the best performance.

Otherwise work up a load from the 110gr load data.
 
The reason you cannot find published data for your CFE223 and the 130 grain 270 is that most publishers of reloading data consider it expedient to publish data that is most applicable.

If you must use this powder with the 130 grain bullet, I would drop back 4 grains from your 110 grain load and work up very carefully. [Have you chronographed your 110 grain load?]

There will be substantial space in that 270 case, since charge weights of CFE223 will be rather light.

Regards, Dave.
 
Cfe223 has shown itself to be very finicky when using different bullets or seating depths, I would recommenfd not using it unless you find data from a proven relaible source.
 
Try buying a few loading manuals, and do some reading.
Relative burn rates will become evident upon reading and comprehending.

CFE223 is too fast for that weight of bullet, try a slower burn rate powder.
 
Try buying a few loading manuals, and do some reading.
Relative burn rates will become evident upon reading and comprehending.

CFE223 is too fast for that weight of bullet, try a slower burn rate powder.
 
Wow ,,,,,, everything from buy books, to use another powder, chrono it, redundant ,awkward , make up your own load and doesnt work. Ya just cant fix normal!
I sent off an email to the makers of CFE223, behold, results were delivered. ..a least they answered the question..

Regards
cfe223 and 130gr hpbt does exist,, yehaw
 
Vettek50 said:
Wow ,,,,,, everything from buy books, to use another powder, chrono it, redundant ,awkward , make up your own load and doesnt work. Ya just cant fix normal!
I sent off an email to the makers of CFE223, behold, results were delivered. ..a least they answered the question..

Regards
cfe223 and 130gr hpbt does exist,, yehaw
Click to expand...

Very Interesting - what did Hogdon recommend to you - Please Share ! Thks RJ
 
You must log in or register to reply here.
Back
Top Bottom