Reloading for M&P 9mm Pro series

[M&P 9mm ProSeriesShooter]

Hello ,

I recently acquired a new M&P 9mm Pro Series 5" barrel. I was wondering if anybody has recommended reloading recipes/ data that they could share?

Thanks,

M&P 9mm ProSeriesShooter

 

[Prankster]

I load a Berrys 147 RN with 4.2 Titegroup @ 1.17 OAL..........I can just hear everyone now................4.2 is way to much..........but I want the steel to fall everytime..........primers look good and it runs flawless.

Hello ,

I recently acquired a new M&P 9mm Pro Series 5" barrel. I was wondering if anybody has recommended reloading recipes/ data that they could share?

Thanks,

M&P 9mm ProSeriesShooter

 

[bobbynewmark]

147 gr. RN FMJ with 3.6 grains of Bullseye and usually cci primers

works awesome in my MP9

 

[ciPeterF]

5.1 \ 5.2 gr Ramshot Silhouette behind BDX 124gr @ 1.125.. great grouping, very clean burning

 

[M&P 9mm ProSeriesShooter]

I am running 124 fmj roundnose with titegroup powder should i be running in between 4.1 grains to 4.4 grains of powder? any thoughts?

 

[ciPeterF]

yep,... http://data.hodgdon.com/main_menu.asp

 

[moikya]

I have loaded Speer 124 gr TMJ RN using 4.2 gr of Bullseye seated at OAL 1.135" for my 1911 and FNP9 and my CZ 75 SP01 Shadow. Also tried Aim's Projectiles 124 gr RN with the same specs except the OAL on the SHADOW, only works fine when seated at 1.075".

Any recommendations/recipes for the following projectiles and powder:

Cactus Plains 124 gr Lead Round Nose for Bullseye, Clays and Titegroup?

Rainier 124 gr Hollow Point for Bullseye, Clays and Titegroup?

 

[browningsteve]

4.0 Gr HP-38 with 147 Fontier TMJ OAL 1.115

 

[ThorInc]

I may be missing something but is this not the North Sylva forum?

 

[Prankster]

Yup...he obviously posted in the wrong section............should we all be d!cks and not answer his question because of that ?

I may be missing something but is this not the North Sylva forum?