Remington 750

G

Gringo_

New member
Rating - 100%
7   0   0
Location
Gatineau, Québec.
Hi everyone. This site is awesome!!!
I have been reading along for a while and I think I finally set my mind on a Woodmaster 750, 3006, 22" BBL with see thru and a 3x9x40 Bushnell trophy.

http://www.remington.com/products/firearms/centerfire_rifles/model_750_woodsmaster.asp

As I am a Libra, and that I didn't see too many comments on the 750 (only one on this site). Would any of you be kind enough to share your experiences?

I will be using this fine rifle for whitetail and moose hunting in average wood density that allow for those longer 300+ yards shots once in a while.

I know that a better scope would probably be a good idea, but this is what our family budget allows for now.

My first and only rifle was a Winchester 30-30 lever action, I have also shot a Browning 308 lever, a lever 300 savage and a semi-auto 7mm mag which I liked quite a bit.

Many would suggest the Remington 700 BDL or the Tikka T3 for their accuracy, but since I am not familiar with the bolt action, I am hesitant.

So, here are my questions:
- Any bad comments/experiences with the 750?
- How much improved is the 750 over the 7400?
- How do you like see thru scope mounts?

Any comments are welcomed.

Thanks,
Felix
 
Last edited:
Gringo_ said:
Many would suggest the Remington 700 BDL or the Tikka T3 for their accuracy, but since I am not familiar with the bolt action, I am hesitant.
Click to expand...
While I can't comment directly on the 750, don't sell yourself short on the bolt actions you mentioned. Both are excellent choices. Accurate and dependable.

The pump action Remington 7600 is a great rifle as well. Fast, accurate and dependable with a detachable mag. I have three pumps in the safe right now. They work great without the problem associated with semis. Also, I know it will sound a bit defeatist, but what if semis do become banned in Canada? :mad:


.
 
klingon.jpg
 
Gringo_ said:
- How do you like see thru scope mounts?
Click to expand...
See thru mounts are the weak link in the rifle they sit on. They are alot more prone to damage that a low mounted ring, plus they force the shooter to lift his head off the stock comb for proper sight picture. Buy a good quality scope and you won't require back up sights.

If you already have a .308 and a 7MMmag, there will be very little gained with a 30/06, but don't let that stop you. :)



.
 
SuperCub said:
If you already have a .308 and a 7MMmag, there will be very little gained with a 30/06, but don't let that stop you. :)
.
Click to expand...


I only have the winchester 30-30, but have used the others many times in the past years. It's just time to get my own.
 
Last edited:
The 750 has a cheek piece, good R3 Limbsaver pad and sling swivels as standard equipment. Beyond the K4H forend Z( looks like a Klingons Forehead), the other improvements are internal, primarily to the gas system.

It is also available in 35 Whelen ...

My own preference is for the 7600 pump. Relatively inexpensive, very reliable and surprisingly accurate. I would also avoid a 3-9 scope .... 2-7 instead.

Deep six any thoughts on the "peek a boo rings" ... absolute crap ! Invest in either the Leupold or Millet "turn-in" style rings on a one piece base and your set.
 
Last edited:
I own several 742's and 7400's along with some 7600's. The 750 is a great rifle for a semi auto, and in 3006 should be a great deer & moose rig. I would agree though, forget about those see-thru mounts and get a decent scope and good mounts for it, I tend to like Weaver and Millet.
 
I have read some jam up issues on some other forums about the 750s.I was pulling for Remington to resolve these Jam-omatic issues with the 750 but it does not seem so.
Might be better off with a BAR.
 
captonion said:
I have read some jam up issues on some other forums about the 750s.I was pulling for Remington to resolve these Jam-omatic issues with the 750 but it does not seem so.
Might be better off with a BAR.
Click to expand...

X2, and the BAR is not much more $$ anyway. Or better yet, go with the BLR in the cal of your choice.
 
I finally went and shot a few rounds (22) with it yesterday. No problems.

It was very windy day here in ottawa and good thing the pickup was up to the task going to our practice grounds, because we got 4 inches of snow Sunday morning in the Gatineau Hills. 4 inches does not seems much at first, but going up a 40 degree climb where a 4x4 is very much needed in the heart of summer adding mud and snow to all that makes a BIG difference. Kudos to my trusty 87' Toyota !

With all that wind and cold, I managed to make a 4" grouping at 150 yards. not much, but I think the shooter was at fault. I will defenitively need to practice more.

What break in procedure do you guys use for brand new guns?
 
Gringo_ said:
I have been reading along for a while and I think I finally set my mind on a Woodmaster 750, 3006, 22" BBL with see thru and a 3x9x40 Bushnell trophy.
Click to expand...

that sounds like the ugliest gun known to man.
 
Since you've already purchased the 750, now is the time to get into the habit of practising good gun cleaning habits. As a semi-auto, your rifle will require additional maintenance to keep it running properly. If you don't keep your gas system clean, especially in sub-zero temps, you're asking for problems. The forerunner to the new 750 was the Remington 7400, aka, the "Jam-o-matic" which, as you may have guessed by now, enjoyed a less than stellar reputation. I'm a hard core Remmy fan, and own probably a dozen or more right at this minute, but the 7400/750 would not be a choice that I would've made...in fact, my local gunsmith refuses to work on them!

That said, my advice is to adopt a zealous cleaning regiment for it. The choice of .30-06 was a good one. It will reliably take any big game animal in N. America, although you might want to upgun a little going after a Kodiak! As for bbl break-in procedure, "expert" opinions vary. Personally, I choose to clean after every shot for the first 10 rounds, then clean after every 3 rounds for the next 10 rounds. Then clean after every 5 rounds for the next 20. A little labour intensive, but it has yielded good results for me in the past.
 
750

Just bought a 750 in 35 Whellan for moose hunting. Shoots very smooth
and 1.25" at 100m. I agree with the keep it clean statement.
Remington recomends using a chamber brush to clean the chamber before
use. Have shot 3 boxes of shells and no jams.
 
dc@dc said:
Just bought a 750 in 35 Whellan for moose hunting. Shoots very smooth
and 1.25" at 100m. I agree with the keep it clean statement.
Remington recomends using a chamber brush to clean the chamber before
use. Have shot 3 boxes of shells and no jams.
Click to expand...
Rust in the chamber has been a problem with the Rem semis in the past, and poorly fitting/worn magazines.



.
 
You must log in or register to reply here.
Back
Top Bottom