Repair scratch in a Browning Citori

[Dman]

What is the best method for touching up a small scratch in stock of a hunter grade Browning Citori. The scratch is not to the wood but seems to have gotten through the finish. Its 1/4" long and a 1/16 " wide Completely refinshing seem a bit too much

Thanks in advance

 

[Levi Garrett]

Could try and pool some clear finish in the scratch, and re apply till its flush. Start sanding, and you will end up with a bigger mess. So fill is your only option, or a full re finish job. True oil may work as a fill, but it will take time to set, and as it dries put more on. Wipe any that spills over where the scratch is not. Hope this helps some.

 

[gunasauras]

Clear acraglas. Put it in the crack and then put a piece of cellophane tape over it and smooth it out with your finger. Remove tape once acraglass has set....if done carefully enough, you'll not even notice it was there....