Replacement butt stock help.

[Deano]

Hey all

I cracked the wooden butt stock on my little Sinsinati folding shotgun. Does anyone have an idea of where I might find a replacement?

 

[Butcherbill]

Probably have better luck fixing it than finding a replacement stock for a Turkish single shot, these were the ones Corwin Arms sold back a few year ago right?

 

[the spank]

Break out the glue.

 

[hunter5425]

Use the right glue and prep carefully, you have one chance to do it right, getting a good bond after a failed attempt is near impossible. I like accraglass as it can be tinted to help hide the glue line but other adhesives will work as well.

 

[maritimer]

Sent you a PM. I likely have one that will work.

 

[FatCatsDad]

Gorilla glue

 

[maritimer]

I’ve found that Titebond III works well for wood. I got it from Lee Valley.

 

[The Kurgan]

I have a spare from my Lazer Arms folder. PM me.

 

[Licensed to kill]

For fresh crack preparation is pretty simple. None is required for the crack itself but for the repair. Regular white/yellow wood glue is stronger than the original wood. Get a lefty of surgical tubing and a syringe. If you know someone that is diabetic ask for a couple once used ones. Open the crack as much as possible and stick the needle in as far as you can the key is that you must fill the entire crack and a syringe is the o my way othe than reaming the stock completely and Gluck g. A k together which is better than trying to fix the. Crack and not getting the glue all the way in. When the crack is entirely full of glue wrap it tightly with the surgicall tubing and let set. Done right it will be stronger than new. Of course the syringe is single use.