Reximex RP PCP
- Thread starter bigHUN
- Start date
Turkish I believe..........but I am not sure which Canadian air rifle manufacturer one would go for??
Candocad.
Did you had geography in the school or you need youtube for that as well? We can all do without the high school level heckling. It fails to impress.
For 237 euros I may buy it anyway from a first source, as usual.
btw, you Mr. sound like a Canadian business, show me what you got, we may trade. Seriously, pm me.....never know...
Last edited:
Then why are you searching for opinions? Feel free to order it but don’t whine and cry when it’s seized at the border. There’s hoops that need to be jumped through to get a new firearm into Canada. It would be different if it was already sold in Canada and there was no stock.
I asked for opinion, learning curve...
A year ago I was looking for the RTI Priest2, way to long waiting time for approval process so I got myself the FX Impact MK2 PP, and I am glad I did not wait. This Impact is my favorite LEGO gun now...all the upgrades cost me arms and legs.
Then I asked for a Sightron scope from US demo sale, it was complicated to get it to my hands and I got the Falcon X50 instead.
Then I asked for this and that, could not get a Leshy2 so I got the PP750,
then couple sights from Eotech, Sig Romeo7, Sig Juliet6...third month already waiting for the Sig Bravo5.
Every day its harder and harder getting just anything from US...so let's go Turkey, even China is making some interesting products. Artemis is getting into a game.
Al we know that this game is a money pit, but we like toys.
A year ago I was looking for the RTI Priest2, way to long waiting time for approval process so I got myself the FX Impact MK2 PP, and I am glad I did not wait. This Impact is my favorite LEGO gun now...all the upgrades cost me arms and legs.
Then I asked for a Sightron scope from US demo sale, it was complicated to get it to my hands and I got the Falcon X50 instead.
Then I asked for this and that, could not get a Leshy2 so I got the PP750,
then couple sights from Eotech, Sig Romeo7, Sig Juliet6...third month already waiting for the Sig Bravo5.
Every day its harder and harder getting just anything from US...so let's go Turkey, even China is making some interesting products. Artemis is getting into a game.
Al we know that this game is a money pit, but we like toys.
sillymike
CGN Ultra frequent flyer
Why anyone would buy a Restricted air pistol is beyond me?
- you can only shoot it at approved range
- same storage and transport rules has a handgun
- if/when you decide to sell it, you'll neex to go through the RCMP-CFO
- the RCMP will want to have one for "inspection" to issue a FRT
and later on, the RCMP will realize the manfacturer makes a carbine version... and they'll impose magazine restriction capacity...
I promised myself when I started with a sport, that I don't want to collect 5-10 or more airguns, also I don't want a powderburner.
I have only one air rifle, the FX Impact PP, with a 700 barrel can fit in a 33" case, still considering it longer then comfortable, and it is pretty heavy as well.
All the shooting ranges are closed so I am more like a mechanic then a shooter, this is my Lego toy. I can take it apart and put it back fully tuned in no time.
Still I got myself the Artemis PP750 as well because it shorter and the piece price was about right for the size, also I can tinker with it.
But if that Leshiy in red would be available I would most likely go for it. This Turkish litlle RP also have some charm and for fractions in price, looks definitely better than my PP750.
Even the shooting ranges would work I don't know what real pistol I would buy, just to have one...H&K maybe? but what to do with it, keep it in a wault all time?
sillymike
CGN Ultra frequent flyer
I too, love airguns. Over the last few years, I'd say over 90% of my trigger-time is with an airgun. I also told myself that I wouldn't end up with 10x of them... so far at 3 PCP (1x 10M pistol, 1x 10M rifle and 1x FT)... And while I don't need it. A tx200/pro-sport would be fun.
To me, the Reximex RP would defeat the purpose of why I got into airguns in the first place.
- The convenience to shoot in the basement, backyard or at the cabin.
A restricted air pistol would be just another range-only toy.
If they would make a sub 500fps version, the potential market (in Canada at least) would be much bigger.
To me, the Reximex RP would defeat the purpose of why I got into airguns in the first place.
- The convenience to shoot in the basement, backyard or at the cabin.
A restricted air pistol would be just another range-only toy.
If they would make a sub 500fps version, the potential market (in Canada at least) would be much bigger.
Same as with the PP750 a restricting valve hause worked the trick for Canadian market.
I am tinkering about RP only because more cosmetically pleasing, the performance shall be better for sure, Turks fabricating decent airguns.
I cannot shoot handguns anyway I don't see the rear sight...my hands are not long enough, I must use optics and a carabine is more friendly for that and still short enough.
I am tinkering about RP only because more cosmetically pleasing, the performance shall be better for sure, Turks fabricating decent airguns.
I cannot shoot handguns anyway I don't see the rear sight...my hands are not long enough, I must use optics and a carabine is more friendly for that and still short enough.
I used to compete in Field archery and I like to walk the deep bush. Unfortunately the closest airgun Field club is in Hamilton, two hours drive diagonally across Toronto. That is killing a good deal. My archery club 10 minutes from my house.
sillymike
CGN Ultra frequent flyer
Kind of a similar situation... Pistol range is over 1H away... Indoor archery is 15min and the outdoor course is maybe 25min. Have yet to try the recurve at 90M, but it's humbling enough at 50M and 70M...
Airguns, I can shoot in the basement or off the porch
For the Leshiy, can't remember if it was someone at Edgun or Edgun West (in the US) that was saying that they could probably manufacture a version without the suppressor (basically, the end of the shroud would not be threaded)
- The $2,000 question is: Who's willing to buy one and gamble on whether or not the guys on horse would approve it
Airguns, I can shoot in the basement or off the porch
For the Leshiy, can't remember if it was someone at Edgun or Edgun West (in the US) that was saying that they could probably manufacture a version without the suppressor (basically, the end of the shroud would not be threaded)
- The $2,000 question is: Who's willing to buy one and gamble on whether or not the guys on horse would approve it
I read it some time ago not in recent past, that, if a XYZ brand makes the suppressor (or call it whatever moderator or ldc) by design as a structural part of a (air)-gun barrel, only then is no suppressor anymore, and doesn't exist.
I have not seen/hear any brand have anything similar, most likely no business case making something like that for CA market...we live on a big land but the market is way too shy just for any custom design.
Is that silver-ish collor a ceracoat? I like it. I would send out my - all black FX to a trusted shop for cosmetics.
I have not seen/hear any brand have anything similar, most likely no business case making something like that for CA market...we live on a big land but the market is way too shy just for any custom design.
Is that silver-ish collor a ceracoat? I like it. I would send out my - all black FX to a trusted shop for cosmetics.
sillymike
CGN Ultra frequent flyer
From what I gathered, integral moderator are a no-no in Canada.
- The horse-guy will tolerate/accept shrouded barrel, but no end-cap or internal baffle.
Do Canadian airgun laws make sense: No... But than again, nor does most gun laws...
Agree, the Canadian market is pretty (darn) small. But it's probably easier to have something custom made by Edgun (who is pretty much a one-man shop) than from a bigger manufacturer. At least, that's was my understanding when I emailed them a few years back.
If you ever get the urge to have a silver Impact, Arma-Coat out Thorhild, AB does nice work.
- The horse-guy will tolerate/accept shrouded barrel, but no end-cap or internal baffle.
Do Canadian airgun laws make sense: No... But than again, nor does most gun laws...
Agree, the Canadian market is pretty (darn) small. But it's probably easier to have something custom made by Edgun (who is pretty much a one-man shop) than from a bigger manufacturer. At least, that's was my understanding when I emailed them a few years back.
If you ever get the urge to have a silver Impact, Arma-Coat out Thorhild, AB does nice work.
A bit far away from L4G7X4. I shall have these shops here locally as well, but my gun, my car, my bicycle, my drones...I am reluctant to give away from my eye sight
I was thinking diy in my garage as Glem did @ AGN, only need to find a spare stove. Not sure how the UV lights could replace the stove curing the coating?
