Ruger New Model Single Six?

1300_stainless

1300_stainless

Regular
Rating - 100%
87   0   0
Location
Nova Scotia, Canada
Just looking for some input. I am looking for a single action 22Lr. Really want a 4 5/8" barrel. Looking for something that will be durable, and last a long time. The Single Six seems to be the standard to which all other SA 22 wheel guns are compared to. I'm leaning that way now as there are lots of tune up parts available too. (Springs, hammers, grips, etc)

Wondering if anyone can tell me what parts are alloy on the single six? AFAIK the grip frame and ejector rod housing are alloy, anything else? I don't like that the rugers cost so much more than the cheaper alloy framed guns even though they are still half alloy themselves.

Any other options out there for a steel or mostly steel 22lr SA in the same price range? I'd really love to have the 4 5/8" barrel with fixed sights but unfortunately Ruger makes you pick one of the other.

I'm not opposed to the alloy guns, but they are usually cheaper made and have little aftermarket support. Also there is just something comforting about the durability of steel when you're looking for something that will last a long time.

Also IIRC the Single Six is a bit smaller in frame size than some of the other SAA Clones is it not?

Any input would be appreciated.
 
I wouldn't worry about the aluminum gri frame's unless you'd prefer the weight of steel then you need to get a stainless model or buy a separate steel grip frame.

Get the stainless in 5.5 and you might just find you grow to like that length and if not you could pay to have it shortened.

The older 3 screw models are really nice if you want fixed sights ( the rear is driftable) but I sort of like being able to adjust the sights.
 
If you want durable, the S/S single six is it. You can even drop it on the driveway in the snow and run over it with the snowplow and it will be fine....
 
I've been shooting a 6.5" for years and find the extra barrel length to help a lot with practical accuracy. I regularly shoot 3x3"" steel targets at 20yds offhand with mine, although lately the locktime of the SA revolvers has been bothering me.
Also tests I've seen with velocities for .22 magnum show significantly higher velocities out of the 6.5 than either the 4.5 or 5.5" barrels.
The 4 5/8" might look more like a gunslingers but the longer barrels have a lot going for them.
 
The Ruger New Mod Single Six was the first HG I ever owned , Bought it new back in the 1970's . I have owned Lot's of different makes & models since then.
I still own that Ruger & it shoots just as good now as it did 30+ yrs ago :D
 
Tough as nails, and then some!

I love my 6.5" SS. The grip frame and ERH are aluminum, but pretty well everything else is steel.

Supposedly the convertable guns aren's as accurate with LR ammo, but mine is plenty accurate, for me anyway.

IMGP6373.jpg


Oh, and I would love to get a 9.5" too!
 
If you want a RIDICULOUSLY light trigger pull;

Take off one of the grip panels. Unhook one of the trigger-spring fingers. Put the grip panel back on. That's it.

BE VERY CAREFUL. Don't #### the hammer until the gun is pointed downrange. You will now have about a 1 pound trigger pull.
 
Um... isn't steel an alloy??? ;-)

Seriously though, the SS is an incredibly solid gun. I don't think I've ever heard a complaint about one from that perspective. I love mine.
 
1300_stainless said:
Wondering if anyone can tell me what parts are alloy on the single six? AFAIK the grip frame and ejector rod housing are alloy, anything else? I don't like that the rugers cost so much more than the cheaper alloy framed guns even though they are still half alloy themselves.

Any other options out there for a steel or mostly steel 22lr SA in the same price range? I'd really love to have the 4 5/8" barrel with fixed sights but unfortunately Ruger makes you pick one of the other.

Any input would be appreciated.
Click to expand...


You pretty much have answered the alloy parts.

As for a stainless model in 4 5/8"...the only one that's in current production is one made by Lipsey.

I was considering having my lgs import that one in for me from gunbroker last year but I never got around to it.

I have both blued 4 5/8 and the stainless 5.5.

I might consider having the barrel shortened...still don't know...hmm.

knr4.jpg
 
I have considered a stainless model, just because all of the parts would be stainless steel then. I feel like they are a bit too "bling" for a SA six shooter though. I'm pretty sure that I've decided on a Single Six, now I just need to decide what model.


Gatehouse said:
If you want durable, the S/S single six is it. You can even drop it on the driveway in the snow and run over it with the snowplow and it will be fine....
Click to expand...
How does one find that out? lol

Jahred.F said:
Tough as nails, and then some!

I love my 6.5" SS. The grip frame and ERH are aluminum, but pretty well everything else is steel.

IMGP6373.jpg
Click to expand...

Looks like you polished the grip frame? I thought about doing that myself if I get one.

Dexter Morgan said:
If you want a RIDICULOUSLY light trigger pull;

Take off one of the grip panels. Unhook one of the trigger-spring fingers. Put the grip panel back on. That's it.

BE VERY CAREFUL. Don't #### the hammer until the gun is pointed downrange. You will now have about a 1 pound trigger pull.
Click to expand...

I had a blackhawk with the "poor boys trigger job". However a spring kit with a new trigger spring and lighter hammer spring gave it a very nice trigger. Same kit fits the Single Six. They're only around $20.
 
Decisions, Decisions. Maybe I'm trying to fix what's not broken? I currently have a single action 22 thats 70s era. It's an aluminum alloy based pistol with steel chamber inserts and a steel barrel liner. (It's sporting a quick half assed Gun-Kote finish)

It still works like a champ for it's age. Also it's very hefty and it is the same size frame as it's centerfire counterparts. I really like those 2 qualities in this gun.

The front sight is a little loose and it's a bit dinged in spots. Should I just invest a little bit into having it fixed up? Can the aluminum based guns be economicaly repaired by a smith? Is it possible to shorten the barrels on them?

Part of me wants a nice Ruger just because, but part of me hates to spend the coin when I already have something similar. Maybe for a few dollars I could have this old girl fixed up.

GEDC0021.jpg
 
Probably not worth spending much on that one if it works well. Maybe a bit of epoxy can tighten up the front sight?

If you watch the EE you can pick up a Single Six for $350-$500 depending on the model.
 
I've got a Single 6 in stainless, 5-1/2" barrel, and it would be one of the very LAST guns I'd ever consider parting with. I don't think you can go wrong.
 
Can-down said:
Probably not worth spending much on that one if it works well. Maybe a bit of epoxy can tighten up the front sight
Click to expand...

You're right. I did some research and as I suspected nobody wants to touch them, because of the material they are made of, anyway.

I think I'm going to go for the blued 4 5/8". I like the added weight the stainless version would have, but personally I don't want a shiny SA wheel gun. I also really like the aesthetics and compactness of the shorter barrel. It will be mostly a plinker so I don't think the amount of accuracy lost over aprox an inch will be a problem. I think I'll try to find a used one first just to save a bit of coin. If I get impatient I'll have to shop around for the most reasonably priced new one.
 
You won't ever regret the extra money spent on quality equipment but will often regret that spent on inferior cheaply made items.
This applies most especially to tools and guns in my experience.

I'm also a guy loath to give up on something that I've already got or that might be improved so I would try to the one that you have. Could you peen or crimp the sight?
Maybe try that and use as partial trade for the shorter barrelled Ruger that you desire?


1300_stainless said:
Decisions, Decisions. Maybe I'm trying to fix what's not broken? I currently have a single action 22 thats 70s era. It's an aluminum alloy based pistol with steel chamber inserts and a steel barrel liner. (It's sporting a quick half assed Gun-Kote finish)

It still works like a champ for it's age. Also it's very hefty and it is the same size frame as it's centerfire counterparts. I really like those 2 qualities in this gun.

The front sight is a little loose and it's a bit dinged in spots. Should I just invest a little bit into having it fixed up? Can the aluminum based guns be economicaly repaired by a smith? Is it possible to shorten the barrels on them?

Part of me wants a nice Ruger just because, but part of me hates to spend the coin when I already have something similar. Maybe for a few dollars I could have this old girl fixed up.

GEDC0021.jpg
Click to expand...
 
vagrantviking said:
I'm also a guy loath to give up on something that I've already got or that might be improved so I would try to the one that you have. Could you peen or crimp the sight?
Maybe try that and use as partial trade for the shorter barrelled Ruger that you desire?
Click to expand...

I'm not sure. It'll stay on there provided it dosn't see a hard bump or knock. It's been a good gun to me, but I think it's just time to upgrade. I have a buddy who will likely buy the old one for what I paid for it. Unfortunately that's not too much. It'll be hard to part with the money for the Ruger, but I think in the long run it will be worth it.

The real kicker here is I had a Single Six briefly before. Only shot it a few times before selling it to fund another purchase. Sold it for about half of what a new one will cost me too:( I guess that's just how this hobby goes sometimes.
 
You must log in or register to reply here.
Back
Top Bottom