Ruger PC Carbine issue

[kagia]

I've been having an issue when I disassemble the rifle for cleaning. Of the two bolt face retaining pins, only one will come out anymore. The other one is stuck and I can't get it out.

Anyone else had this issue? Any ideas how to get it out?

 

[B]

I have notice that they seem to peen inside and I would guess yours has done so enough to cause your issue. If you can find some way to get underneath it and pry it would likely come out with some effort.

 

[Yanger316]

There is company that makes a upgrade pins
Don’t remember who

 

[Tom E Gun]

There is company that makes a upgrade pins
Don’t remember who

Tandemkross

 

[Shooting Centre]

There is company that makes a upgrade pins
Don’t remember who

M*Carbo. They currently back ordered for a few weeks though.

 

[kagia]

Thanks! Does M*carbo ship to Canada?

 

[Tom E Gun]

Yes, from another thread:

"I'm not sure if this has been mentioned already, but there is a US company called MCARBO that makes a trigger spring kit (13 USD) and a cheek riser (10USD) for the Ruger PCC. The good news is they ship to Canada. Shipping was 13 USD."

"M*Carbo Trigger Spring Kit
I finally got around to installing my MCarbo spring kit today. It took about 5 minutes to install. Prior to modification my trigger was running at about 4lb 7.7oz, after the spring swap the trigger pull has reduced to 3lb 11.5oz. Not a huge reduction but not bad for $13 USD."

 

[Canuck44]

I have ordered items from MCarbo. Excellent company,fast friendly service. The stuff I ordered worked great and ware quality products.

Take Care

Bob

 

[Ribstaylor]

Mcarbo doesn't seem to be able to ship to Canada till next year. So going to have to wait on the parts unless you find one hanging around Canada.