- Location
- Edmonton, AB
Where can I get one, how much are they generally, and does anyone in Edmonton have one in 7.62x39 that I could borrow for a couple of hours?
Ruptured Case Extractor
- Thread starter Grizz Axxemann
- Start date
- Location
- Edmonton, AB
Nope. SKS with a separated barrel.
- Location
- Edmonton, AB
So does anyone have a line on one?
grizz go to canmbodian tire take an empty with you look in the tool section for an "easy-out" that fits the inside case dia. *GENTLY* push this into the seperated case once in apply slight forward pressure while turning counter clockwise until brassie is free and removed should work thats how i got one from my 303
Lee Enfield
CGN Ultra frequent flyer
- Location
- Republic of Alberta
Grizz Axxemann said:
Define separated barrel?
Do you mean it's a press fit & pinned that is coming out?
- Location
- Edmonton, AB
Lee Enfield said:Define separated barrel?
Do you mean it's a press fit & pinned that is coming out?
Yep. that's it!
- Location
- Edmonton, AB
Canuck223 said:
I bought it used
Will Lever take it back if i can trace that it came from them originally?
Grizz Axxemann said:I bought it used
Will Lever take it back if i can trace that it came from them originally?
Considering the options, it's worth the phone call. As far as I know, they have been exchanging them and I've yet to hear that they won't make good after it's resold. Needless to say we are all interested to hear what answer you get.
- Location
- Edmonton, AB
m39a2 said:
I'll give them a call too.
- Location
- Edmonton, AB
P&D have none in stock... this is not good
Any other ideas? I want to do this right.
Any other ideas? I want to do this right.
Last edited:
- Location
- Edmonton, AB
which size would work? I really don't want to foul up my barrel or chamber
what caliber is it for starterstake an empty cut the primer side out and go to cambodian tire and find an easy out that the very tip fits snugly in then gently turn it ccw out you can also try useing a taper bolt similer to a larger wood lag bolt spray a little lube in there pryor too like wd-40 or something similer
if you have big clumsy fingers like me get your mrs' to help out
if you have big clumsy fingers like me get your mrs' to help out
- Location
- Edmonton, AB
it's 7.62x39mm... i have no empty brass on hand, but the next range outing, i'll grab a piece, seeing as there's tons of it flying around
If you don't mind ordering from the USA, Cheaper Than Dirt has them in stock and usually they deliver within two to three days. If you have not found any to date, you can always try them. They have a toll free number 1-800-421-8147.
Good luck
Robert
Good luck
Robert
