S&J built Remington 870 MCS avaliable

badboybeeson

badboybeeson

CGN Ultra frequent flyer
Business Member
Rating - 97.2%
612   18   5
Location
East ontario
Well it's finally here this was a few years in the making .
https://sjhardware.com/s-j-remington-870-mcs-12-ga-10-bbl/?searchid=0&search_query=Mcs

We are getting close to having a complete gun on the market. Just need to cerakote and test fire
This will be a pre-order as 95% of this project is complete.
There will be only 30 of these guns offered. As the rest are pre sold

We are offering these guns in 4 different configurations, with 2 variables to choose between.

2 Receiver Options:

870 Fieldmaster Receiver

870 Police Magnum Receiver

2 Buttstock Options:

MCS M4 Adjustable Buttstock, milspc buffer tube and magpul MOE buttstock

MCS Remington 870 Speedfeed lV Stock

All guns will come with the following parts:

MCS Pachmyer Pistol Grip

Remington 870 MCS Steel M1913 Rail

Steel sling stud on top

Remington 870 MCS Receiver Assembly Base M1913 4140 steel

Remington 870 MCS Receiver Nut

MCS 10" barrel heavy cylinder bore, bead sight

MCS CQCG (Close Quarter Combat Grip) *Steel compact folding grip 4140 HTSR, MPI tested welds

MCS Breaching Sling 22" Black

Remington 870 Jumbo safety

DSC Detachable Shotshell Carrier Strip - 5 Shot - Black x2

No jam follower (Type 3) and million cycle spring

Non MIM extractor

Police dog follower spring

Kydex Holster for MCS 870 Breacher Belt attachment - Ambi

Complete gun deburred, polished, and cerakoted in Graphite Black

100% of all products are Canadian and US made - Zero Chinesium

** This shot gun will be shipped with the full length stock and will be considered non restricted by the RCMP. Installation of the pistol grip with make this shotgun less then 660mm COL and will be considered restricted.
20250903_180735.jpg
 
Last edited:
So are the S&J MCS and a Remington MCS 100% interchangeable as far as parts go?

This is a remarkable undertaking with all the different pieces that are needed
 
call2arms said:
So are the S&J MCS and a Remington MCS 100% interchangeable as far as parts go?

This is a remarkable undertaking with all the different pieces that are needed
Click to expand...
Yes 98%
I have every msc part ever made Inc some differen generation of parts. and a few one offs.
Where you may see some differences is things like the size of the dented used for the retaining pin ot so angles on the pistol grip.
But say you needed a new speedfeed Mk IV msc insert to-go into an original stock ours fits into the original.
Or the short receiver nut. Is stainless not parkerised steel.
The barrel are not currently made by us but do fit on my personal MCS Gun .
The screws for the steel M1913 rail are the mcs parent and are 8x40 but just a different profile.
The pump forend metal is cut to same length and thread as a real mcs.

We have more MCS parts coming , but we need to get a few more sold before we jump back into that.
 
Last edited:
badboybeeson said:
Yes 98%
I have every msc part ever made Inc some differen generation of parts. and a few one offs.
Where you may see some differences is things like the size of the dented used for the retaining pin ot so angles on the pistol grip.
But say you needed a new speedfeed Mk IV msc insert to-go into an original stock ours fits into the original.
Or the short receiver nut. Is stainless not parkerised steel.
The barrel are not currently made by us but do fit on my personal MCS Gun .
The screws for the steel M1913 rail are the mcs parent and are 8x40 but just a different profile.
The pump forend metal is cut to same length and thread as a real mcs.

We have more MCS parts coming , but we need to get a few more sold before we jump back into that.
Click to expand...
Thanks. That is great that the parts are interchangeable. Fantastic work
 
You must log in or register to reply here.
Back
Top Bottom