Sako Finnlight Soft Touch refinish/replace

I have a Sako A7. The stock got terribly sticky. i used acetone and a Scotchbrite pad (or 2). Was a bit of work but in a couple hours i had it stripped. I then sprayed mine with Ultra Flat Krylon flat black. Then sponge dabbed Ultra Flat Krylon in 3 colors on top of that. Was going to seal it with clear but never did. I'm quite happy with the way it turned out.
 
Sustut said:
I have a Sako A7. The stock got terribly sticky. i used acetone and a Scotchbrite pad (or 2). Was a bit of work but in a couple hours i had it stripped. I then sprayed mine with Ultra Flat Krylon flat black. Then sponge dabbed Ultra Flat Krylon in 3 colors on top of that. Was going to seal it with clear but never did. I'm quite happy with the way it turned out.
Click to expand...
Care to share a pic?
Nothing like a good idea and a few hours of spare time to sort things out.
Had an Browning A-bolt with a dura touch stock and the previous owner removed the sticky coating.
Browning now has a offer to replace the stock if it becomes sticky.
 
You must log in or register to reply here.
Back
Top Bottom