SAM Major component SALE LIST

Wolverine .303

Wolverine .303

Business Member Rep
Location
Lattitude - 49.89617 | Longitude - 100.85384
As Per Mr. Wolverine:


As always:

You can E-mail us at: sales@wolverineSupplies.com

You can Call us at: 204-748-2454

You can send at letter to: Box 729 , #1 River Valley Road, Virden, MB, R0M 2C0 , Canada

You can send a messenger to : Lattitude - 49.89617 | Longitude - 100.85384 NE ¼ 5-11-25

1911 Frame Stainless Commander stripped New Two only Regular $225 Sale$95.00
1911 Frame Govt. Stainless stripped One only SOLD

Slide Thunderbolt .45 stainless with Adj rear and dovetailed front sight Used Sale $270.00
Slide Thunderbolt .45 Blue stripped New Sale $210.00
Slide Commander .45 Stainless stripped with Fixed “Novak style” combat sights New Sale $195.00
Slide Commander-E Enhanced machined for “Novak style” sights used. Sale $75.00

Slide Sigma 9 Stainless complete with sights, barrel recoil assemble used SOLD
Slide Sigma 9 Stainless sights, barrel recoil assemble needs extractor and firing pin assemble used Sale $250.00
Slide Sigma 9 stainless with sights and barrel only used Sale $190.00

Barrels 1911 new

9 mm Stainless 5 inch Three Sale $75.00
9 mm Blue 5 inch Four Sale $50.00
.45 ACP Stainless 5 inch Two Sale $75.00
.45 ACP Blue 5 inch three Sale $50.00
.45 ACP Blue 4.25 inch One Sale $50.00
.40 S&W Blue 5 inch Incorrectly stamped “.45ACP” Two only New Sale $40.00

DCAz1Zl.jpg
 
Last edited:
Forgive the ignorance but is it possible to build a pistol from the parts listed or is this for people who need spare parts only?

I'm new to firearms but am very eager.
 
Loosethoughts said:
Forgive the ignorance but is it possible to build a pistol from the parts listed or is this for people who need spare parts only?

I'm new to firearms but am very eager.
Click to expand...

If your new to guns building a 1911 from parts probably isn't the best idea. You would be better of just buying a completed Sam from wolverine.
 
Loosethoughts said:
Forgive the ignorance but is it possible to build a pistol from the parts listed or is this for people who need spare parts only?

I'm new to firearms but am very eager.
Click to expand...

I tend to agree with Skoal but it really depends on you. Your knowledge, patience and skill with hand fitting of parts? If you are you looking for a learning project, maybe yes, if you are only looking for a cheap gun then no. We should have all the other small parts you will need to complete your project, I plan to be listing them in the New Year. These parts are cheap but they are sold "As Is".
 
skoal said:
If your new to guns building a 1911 from parts probably isn't the best idea. You would be better of just buying a completed Sam from wolverine.
Click to expand...

Mr Wolverine said:
I tend to agree with Skoal but it really depends on you. Your knowledge, patience and skill with hand fitting of parts? If you are you looking for a learning project, maybe yes, if you are only looking for a cheap gun then no. We should have all the other small parts you will need to complete your project, I plan to be listing them in the New Year. These parts are cheap but they are sold "As Is".
Click to expand...

It would definitely be a project with the aim of being able to eventually shoot it.

Thanks for the direction Skoal & Wolverine. I'll do a bit more research before jumping in.

I feel a 1911 would be a good project pistol as there is a ton of information and parts available. Do let me know if you disagree.
 
MET said:
As for the 9mm SS 5" barrels, were these fitted to slides or are they uncut? Are they the non feed ramp type?

Cheers
MET
Click to expand...

SAM do not use feedramp in their firearms.

But yes, are they uncut/ unfit? i need one too
 
Loosethoughts said:
It would definitely be a project with the aim of being able to eventually shoot it.

Thanks for the direction Skoal & Wolverine. I'll do a bit more research before jumping in.

I feel a 1911 would be a good project pistol as there is a ton of information and parts available. Do let me know if you disagree.
Click to expand...

Like John said,it can be done however you need to understand what your getting yourself into. There are specialized tools and fixtures you may need along with internals and it won't be a cheap experiment. That being said if the money dosnt matter much and the end result just needs to shoot it's more then possible you just need to have a understanding of the whole process and that why I say maybe just buy one first and learn how the gun functions and works before you start from scratch I'm not saying don't build one im saying maybe don't build your first one.
 
Tried to PM you but admin blocked??

The stainless Tbolt slide with adj sights....does it have its guts ( firing pin/extractor/stop etc) ??

Thanks
 
"Awesome, I sent an email to Evan this morning about 1 5" SS 9mm barrel, hope he gets my email before they are gone."

Which is why I phoned as well ( not the item you were looking for, by the way). Great prices.
 
You must log in or register to reply here.
Back
Top Bottom