Scope base for ruger 10/22

[gambit]

I can not fit my scope on the existing base of my ruger 10/22 ,what base should I get ??

 

[matou2041]

what type of ring????? what size of scope?????


the ruger base suppose able to handle the regular .22 grouve and the weaver ring to.

 

[HPL]

Is it the old style Ruger scope base? The newer ones are more standard and will take 3/8" and 1/2" Weaver-style rings.

If you're looking for an actual Weaver mount, I think it's TO-9.

 

[gambit]

The rugeer is only less than a year old and the scope is a Tasco a $50 one so I need to replace rings that came with the scope ?

 

[wobbles99]

Some pics of your rings would help. I got a friend who has a tasco on his 10/22 and the stock rings worked. I used simmons rings on my simmons and they cost me $15.00 for the pair and hold real good. If that doesn't help you then try thishttp://www.rimfiresports.com/merchant.mv?Screen=PROD&Store_Code=RSC&Product_Code=VC10RM&Category_Code=R1A
It a VQ mount from rimfire sports. The price is in american but this guy shipps for free to Canada.

 

[cz452shooter]

I am not sure if this will help at all, but i would recomend getting the Weaver T09 and a pair of Burris zee rings.

 

[Westicle]

I don't like the weaver base, find it to thin..... I use the power custom base which is approx 2x as thick and mounts the scope a lot more firmly. and you can usually get away with low or medium rings depending on the objective lens size.

 

[Josh M]

I use the regular weaver base. It comes loose sometimes so I am going to blue locktite it to the receiver with 15 inch/lbs of torque tomorrow.

 

[captain2k_ca]

I am using a Leupold base and Leupold rings and love the way they fit, and they also look nice.

 

[scott]

I'm using the VQ base as mentioned about with buris Zee rings

 

[skeetgunner]

I don't like the weaver base, find it to thin..... I use the power custom base which is approx 2x as thick and mounts the scope a lot more firmly. and you can usually get away with low or medium rings depending on the objective lens size.

Ditto. I use the same config and am very pleased with the results. Like Josh, I also locktited and torqued the PC base when I installed it.

 

[chappy]

i like the weaver t9 and reg weaver rings. with this setup you can mount almost any combination and its cheap.