Scope for Savage 10TR

Paul_M

CGN Regular
EE Expired
Rating - 100%
88   0   0
Location
YQG
Looking for recommendations for a scope for my Savage 10TR in 308 with a 20" bbl. I put a Burris Fullfield E1 3-9x40 in medium rings on it, first range trip will be in a couple of days. It's probably good enough for the maximum 200 yard shooting I'll be doing, but if I was to replace it, with a budget of $400-500, what would you guys recommend?

Also...I've been using red dots for years, don't know anything really about scopes...the way the Burris is mounted, in medium rings, there's barely a hair's clearance between the bottom of the scope, about mid-way from where the objective begins to flare out and the end, and the top of the rail (long rail, short scope). They're not touching, but it's very close, and I can't move it any farther forward and still see through it. Will this be an issue?

Thanks Nutz.
 
If you buy a scope with a larger objective, then you will need new (high) rings as well. You might consider a used Bushnell 4200 with AO, they are long scopes with a 1 inch tube. You can get one for around 400$...
 
Back
Top Bottom