Scope mount help
- Thread starter Camj
- Start date
Dlask makes 10/22 rails, but they are are not on their website yet.
There are 3 hights available: 3/8”, ½”, and 3/4” tall.
You probably need the one that is 3/4” high.
It is intended for large optics, or or for high cheek pieces (like your case here).
Although it is not intended primarily as a see-through mount,
this 3/4" has some see-through capabilities for using the factory iron sights.
These rails have some other features as well.
This is the one that is 3/4” tall.
This is a rifle with factory barrel, a scope with a huge 50mm front bell
and extra-high rings.
It uses the 3/4" rail also for the see-through capability.
There are 3 hights available: 3/8”, ½”, and 3/4” tall.
You probably need the one that is 3/4” high.
It is intended for large optics, or or for high cheek pieces (like your case here).
Although it is not intended primarily as a see-through mount,
this 3/4" has some see-through capabilities for using the factory iron sights.
These rails have some other features as well.
This is the one that is 3/4” tall.
This is a rifle with factory barrel, a scope with a huge 50mm front bell
and extra-high rings.
It uses the 3/4" rail also for the see-through capability.
Last edited:
New Rail
Just bought the new rail from Dlask for my new 10/22 target build, what a nice piece of work. Sure am glad that we have an opportunity to purchase some high quality parts like these that are home grown. I got the 3/8 rail which isn't high enough for what you want but these things are nice. I would recommend them to anyone in the 10/22 market. I paid $30 plus tax for mine which I thought was very reasonable, so here are some pics to tickle your fancy!
P.S. These are made with 6 mounting holes and are reversable so you can have the rail extend over the barrel or only on the receiver. Of course they will add some extra rigidity as well. It is easy to drill and tap the extra two holes by mounting the rail and using a centre drill of the proper diameter to mark them then they can be drilled and tapped on almost any drill press. Pretty nice added feature if you ask me. Good work Joe and crew!
Just bought the new rail from Dlask for my new 10/22 target build, what a nice piece of work. Sure am glad that we have an opportunity to purchase some high quality parts like these that are home grown. I got the 3/8 rail which isn't high enough for what you want but these things are nice. I would recommend them to anyone in the 10/22 market. I paid $30 plus tax for mine which I thought was very reasonable, so here are some pics to tickle your fancy!
P.S. These are made with 6 mounting holes and are reversable so you can have the rail extend over the barrel or only on the receiver. Of course they will add some extra rigidity as well. It is easy to drill and tap the extra two holes by mounting the rail and using a centre drill of the proper diameter to mark them then they can be drilled and tapped on almost any drill press. Pretty nice added feature if you ask me. Good work Joe and crew!
Junkyard Dawg
CGN Regular
- Location
- Salmon Arm, B.C.
Fabsports also carries a see-through high-rise scope base for a 10/22. I used that coupled with high-rise scope rings to get the sighting picture that I wanted.
- Location
- on the road again
those Dlask rails look very nice and they came just in time for my winter builds.
