ctcs
Expired Business Member
- Location
- Vancouver, BC
We received a MASSIVE shipment of Seekins Precision Products today
Seekins Precision SP3R Ruger Precision Rail System - MLOK
The SP3R V3 by Seekins Precision brings precision rifle stock performance to your Ruger Precision Rifle. Flat on the bottom for stability when shooting off of barricades or other objects, the unique design is thin for use in dynamic shooting and rifle handling situations. Machined from 6061-T6 aluminum compatible with M-LOK, a top integral rail and integral QD sling mounting points, the SP3R V3 is the perfect hand guard for tactical, competition or sporting applications.
Available in
12-Inch - $279.99
15-Inch - $289.99
Seekins Precision 30mm Scope Rings
Scopes are only as good as the rings they are mounted in. Seekins Precision Scope Rings are the best available through superior design, precision machining and obsessive attention to detail. Built to the 1913 Picatinny Specification from 7075-T6 aluminum, these Seekins scope rings are available in 30mm and in heights from Low through AR High to accommodate most rifle and optic combinations.
Available in
$204.99
Seekins Precision Remington 700 Scope Base
Scope bases are an often overlooked, yet critical component to building the best precision rifle system possible. Machined from 7075-T6 aluminum to the 1913 Picatinny Specification, Seekins Precision Scope Bases are the best components available for mounting precision optics to precision rifles.
Available in
0 MOA Short Action - Remington 700
20 MOA Short Action - Remington 700
0 MOA Long Action - Remington 700
20 MOA Long Action - Remington 700
$159.99
Seekins Precision SRS Rail
The Seekins Precision Sling Rail System (SRS) was designed provide a Picatinny rail mounting point, with a reinforced, non-rotating sling attachment point on the bottom of bolt action rifle stocks for mounting bipods that use the Picatinny system. Installation is simple, just use the existing holes in the bottom of the stock with the provided mounting screws. If your stock has only one sling stud another can be easily installed using any T-nut found at most hardware stores. The SRS is CNC machined from billet 6061-T6 aluminum and Type III Class 2 Hardcoat Anodized matte black.
Available in
2.0" Hole Spacing - HS Precision
2.5" Hole Spacing - Bell & Carlson
3.0" Hole Spacing - McMillan
$39.99
Seekins Precision SP3R Ruger Precision Rail System - MLOK
The SP3R V3 by Seekins Precision brings precision rifle stock performance to your Ruger Precision Rifle. Flat on the bottom for stability when shooting off of barricades or other objects, the unique design is thin for use in dynamic shooting and rifle handling situations. Machined from 6061-T6 aluminum compatible with M-LOK, a top integral rail and integral QD sling mounting points, the SP3R V3 is the perfect hand guard for tactical, competition or sporting applications.
- Precision rifle, flat bottom design for stability
- Machined from 6061-T6 aluminum
- 1pc Free Float Design
- Type III Class 2 Hardcoat Anodized matte black
- Six integrally machined anti-rotation QD sling mounts
- Comes with mounting hardware and Ruger specific barrel nut
Available in
12-Inch - $279.99
15-Inch - $289.99
Seekins Precision 30mm Scope Rings
Scopes are only as good as the rings they are mounted in. Seekins Precision Scope Rings are the best available through superior design, precision machining and obsessive attention to detail. Built to the 1913 Picatinny Specification from 7075-T6 aluminum, these Seekins scope rings are available in 30mm and in heights from Low through AR High to accommodate most rifle and optic combinations.
- Perfectly CNC Machined 7075-T6 Billet
- 1913 Picatinny Mil-Spec
- Type III Class 2 Hardcoat Anodized Finish
- Center lug machined into place
- Grade 8 T25 Torx Screws
- Serialized Pairs
- Slim Line Clamps
Available in
- 0.82" - Low
- 0.97" - High
- 1.26" - Extra High
- 1.45" - AR High (Cowitness)
$204.99
Seekins Precision Remington 700 Scope Base
Scope bases are an often overlooked, yet critical component to building the best precision rifle system possible. Machined from 7075-T6 aluminum to the 1913 Picatinny Specification, Seekins Precision Scope Bases are the best components available for mounting precision optics to precision rifles.
- 7075-T6 Billet
- Continuous rail
- One piece design
- Built to 1913 Picatinny Mil-Spec
- Type III Class 2 Hardcoat Anodized Finish
Available in
0 MOA Short Action - Remington 700
20 MOA Short Action - Remington 700
0 MOA Long Action - Remington 700
20 MOA Long Action - Remington 700
$159.99
Seekins Precision SRS Rail
The Seekins Precision Sling Rail System (SRS) was designed provide a Picatinny rail mounting point, with a reinforced, non-rotating sling attachment point on the bottom of bolt action rifle stocks for mounting bipods that use the Picatinny system. Installation is simple, just use the existing holes in the bottom of the stock with the provided mounting screws. If your stock has only one sling stud another can be easily installed using any T-nut found at most hardware stores. The SRS is CNC machined from billet 6061-T6 aluminum and Type III Class 2 Hardcoat Anodized matte black.
- Anti Rotation Sling Mount
- CNC machined from 6061-T6 billet aluminum
- Mil-Spec 1913 Picatinny Rail
- Type III Class 2 hardcoat anodizing matte black
- Mounting screws included
Available in
2.0" Hole Spacing - HS Precision
2.5" Hole Spacing - Bell & Carlson
3.0" Hole Spacing - McMillan
$39.99
