[SFRC] Canuck Wrangler Lever Actions on theammosource.com

GUNFU66 said:
I purchased this same rifle and it was advertised as "picatinny rail included" but when I opened the box, no rail. I called Bullseye and one sales guy said that this rifle didn't come with one because it has a top ejector, and that I would need to have to modify it. He's wrong because i found the video for O'Dell and it clearly stated that the Jurassic comes with rail. I called Bullseye and send video, and manager sent work order for missing part. I just got courier notice that I will be receiving a package soon. Here is the video link:

Click to expand...
I actually just recieved my rail in the mail today!

I filled out a warranty form on O'Dell's website as advised by SFRC over the Christmas Holidays and it showed up today. Haven't had a chance to try it out.

Love the rifle so far have put about 175 round of 357 and 38 special (158 grain) with no issues
 
wedge308 said:
Sooo many questions...

What's the warranty?
Is there a lever saftey?
How smooth is the action?
What's the trigger like?
Will it feed 38 special? (I know the chamber will fire them, but will they feed)
Click to expand...
Same here ! I’d really like to know if there are upgrade for the Jurassic in 357 (ex will accommodate Henry big boy x parts) and what about the loop, can we swap it out for large loop ? If so, what one ?
 
Has someone put one these through a rigorous test ?

Not a box at the Range one day, but a stress test and then checked how the parts looked and whether anything was loose or looked beat up.
 
GUNFU66 said:
Isn't the Wrangler Jurassic, like the Rossi 92, just another spin off of the Winchester 1892?
Click to expand...
That's what I was thinking..where are they made?..maybe the same factory as a Rossi? I've had my Rossi 92, in 357mag/ 38 for a while now. Works great , good and light ( very light) hunting carry rifle. Mine has the 16 inch barrel, shoots a 3 inch ..or better off hand. Probably better, with a shooter, with better eyes...mine has the top safety..that no one likes...well I like it for unloading, if you can't get them out the gate..
Well built little rifle, for a good price. Hopefully they are the same.
 
quinnbrian said:
That's what I was thinking..where are they made?..maybe the same factory as a Rossi? I've had my Rossi 92, in 357mag/ 38 for a while now. Works great , good and light ( very light) hunting carry rifle. Mine has the 16 inch barrel, shoots a 3 inch ..or better off hand. Probably better, with a shooter, with better eyes...mine has the top safety..that no one likes...well I like it for unloading, if you can't get them out the gate..
Well built little rifle, for a good price. Hopefully they are the same.
Click to expand...
The Rossi's and the Levtac Citadels are made in Brazil. I believe these Canuck levers are made in Turkey.
 
I wish I had read this prior to purchasing. O’Dell stated at TACCOM that rails were included with every model. No rail in my box so I have just contacted O’Dell. MTF.

 
Last edited:
astuart44 said:
I wish I had read this prior to purchasing. O’Dell stated at TACCOM that rails were included with every model. No rail in my box so I am going to sell it. See ya.

Click to expand...

O'Dell has assured us that you can contact them through their warranty site and they will take care of you.
 
O'Dell has not responded to my Warranty submission made on their website 6 Feb 2025. There is no email listed to contact them on their website.
 
Last edited:
astuart44 said:
O'Dell has not responded to my Warranty submission made on their website 6 Feb 2025. There is no email listed to contact them on their website. The following cell phone number they have listed is Not Assigned: 519-654-9600

Pls explain to me how a company in 2025 expects to remain competitive with this deplorable level of service. So pathetic it is almost comical.
Click to expand...
O'Dell has advised us that they responded to your provided e-mail address on February 10th. They sent a screen shot of it and it's quite possible the rail is already on its way. We can post it, if you would like, to verify, but based on your handle here and the name in the e-mail, it's safe to assume that it's you. We'd rather you check your e-mail to see the response yourself, including your spam folder. Stuff happens, sometimes.
 
SFRC-Marketing said:
O'Dell has advised us that they responded to your provided e-mail address on February 10th. They sent a screen shot of it and it's quite possible the rail is already on its way. We can post it, if you would like, to verify, but based on your handle here and the name in the e-mail, it's safe to assume that it's you. We'd rather you check your e-mail to see the response yourself, including your spam folder. Stuff happens, sometimes.
Click to expand...
Found the email in my spam...from an individual as opposed to the company name. Thanks for the help.
 
Anthony at O'Dell hooked me up. Much appreciated. Fits like a glove and I cannot wait to try it. Cycles 305 grain HSM hard cast with no issues.
 

Attachments

  • IMG_3354.jpg
    IMG_3354.jpg
    47.7 KB · Views: 40
  • IMG_3353.jpg
    IMG_3353.jpg
    98.8 KB · Views: 36
You must log in or register to reply here.
Back
Top Bottom