short 12gauge

[thefuzz]

Does anyone know where to get 1 3/4 12gauge rounds?

 

[yomomma]

Store?

 

[weasel1]

Holy lurker Batman! Join date of 2007 and now a post?

 

[thefuzz]

So no answers.

 

[Alberta Woodsman]

Considering 1 3/4" shells are the most common available you should be able to pick them up at any store that sells ammunition.

 

[Soulfly]

So no answers.

Typical CGN, aren't you glad you didn't post all this time?

Considering 1 3/4" shells are the most common available you should be able to pick them up at any store that sells ammunition.

Uhh.. Wat?
Did you mean 2-3/4"? Because OP was looking for 1-3/4" shells...

 

[BlackBrant]

OK ,now for some info that might help !

Aguila makes 1 3/4" (not the most common size I would not think ?) shorty shells in mini-slugs and at least a 7 1/2 shot (I have one of each in my cartridge collection) but not sure what other shot loads they might make.

I have never seen them here in Canada ,although I never really looked for them ,and didn`t know they existed until I was doing some googlin` and stumbled upon them.

You may try some of the retail sponsers here on CGN and contact them to see if they can get them or if they even stock them.

cheers

Paul T

 

[EL34/6L6]

Yeah, 1 3/4 is what the OP asked for. Never seen them before myself.

 

[thefuzz]

Thanks black brant. I will check those out.
And to the others sorry my question wasn't clear.
I should be able to stuff around 20 of those shorty shells into the ksg

 

[thefuzz]

Thanks black brant. I will check those out.
And to the others sorry my question wasn't clear.
I should be able to stuff around 20 of those shorty shells into the ksg

 

[Turkinator]

Just be warned if you plan on using them in a pump or semi they will not cycle reliably at all.

 

[thefuzz]

Though I haven't tested it yet I believe keltec states it will reliably cycle them

 

[buzzmagoo]

They will function no problem. Just take your time and not speed pump them . will shoot in a semi just won't function the action almost impossible to find here in canada. Roll your own only other option.

 

[sunray]

1.75" 12 gauge ammo is Aguila. Don't think Aquila has a Canadian distributor.
Wouldn't rely on what Kel-tec says either.

 

[Brutus]

Just be warned if you plan on using them in a pump or semi they will not cycle reliably at all.

They are rumored to be more reliable in feeding/ejecting with the older Ithaca M-37 using the 2 3/4inch only receiver.