sks issue

[camnorth]

Hi,
Has anyone ever had a round of poor quality ammo fire and the cartridge get stuck in chamber? Extractor tore off part of rim, any ideas how to remove from SKS barrel?

 

[1oldfart]

Hi,
Has anyone ever had a round of poor quality ammo fire and the cartridge get stuck in chamber? Extractor tore off part of rim, any ideas how to remove from SKS barrel?

ram rod

 

[tony9000]

soak in penetrating oil, like PB blaster, then use a cleaning rod, and tap it out

 

[bobdbldr]

Yes, and perhaps read this for possible causes.
https://www.canadiangunnutz.com/forum/showthread.php/1717713-7-62x39-S-amp-B-case-separation

 

[camnorth]

Thanks alot everyone I'll give it a go!

 

[Dad003]

once you get it out clean tyhe chamber you probably got some lacquer build up in it that why it got stuck !

 

[scottie350]

Had this happen to me last weekend. I used the cleaning rod on the gun to slide down the barrel and punch it out. Only one of about 100 did it, i made sure after it did happen to carefully inspect each shell before loading up the mags from then on, as i did find an aditional one with a dent, which i shouldve expected from surplus. That was round about 10, no issues after the fact and being more diligent