sks scope mount

[DeRK]

so, ive searched but nothing really useful to answer my question came up in the search results..

first off, does any one know if the molot side rail with a posp scope will be centered over the reciever?

if not, then will the side rails where you have to inlet the stock fix this? if so, who makes one for the sks and where do i get it?

i really dislike the offset scopes..

 

[TeaPot2]

On this picture you could see that the mount rail was intentionally made to move the scope to the left that will allow for loading from the clips. So, if you would use the "original" Molot side rail, the scope should be centered above the receiver

 

[TeaPot2]

this way (Mosin-Nagant side rail) is probably most convenient, but I'm not sure about the quality of the scope...

 

[nikoinwinnipeg]

did you drill the reciver for this scope mount?

can you take the scope mount off and take some detailed pictures?

what kind of scope mount is it??


let us know

 

[TeaPot2]

they are not my. I did some research on internet...the pictures are from this forum:
hxxp ://www.calguns.net/calgunforum/showthread.php?t=32973&page=11
and this website: hxxp://victorinc.com/SKS-FAQ.html

yes they are both drilled.

 

[suprathepeg]

It is shell ejection that you need to be wary of not the stripper clip access.