Sks trigger group clean

[po_the_drum]

Hi
little question,

When you clean your sks after shoot corrosive ammo, do you always dissemble and clean the trigger group?

Or just clean barrel,bolt assembly and gas tube?
thank

 

[Satain]

I douse everything in hot boiling water & since I used water proof grease for the sear and hammer I don't have to re-lube to many time's. Also some times deberis gets wedged under the trigger bar. Also try fast dring silicone spray for the trigger it will improve the feel of the trigger and won't attract the carbon build up that much.

 

[Spearhunter]

If you're worried about corrosion in the trigger assy., I'd say not to worry and leave it alone????

But cleaning & lubricating it occasionally should be fine.

 

[Curtton]

If you're worried about corrosion in the trigger assy., I'd say not to worry and leave it alone????

But cleaning & lubricating it occasionally should be fine.

good advise .

altho disassembling trigger isnt difficult if you use the cleaning kit cyclinder container, i put over the hammer and use it as leverage and push down to disengage from the main trigger frame.